regulator

selling all equipment asking (reduces) $500, my loss your gain. Changing jobs and don’t have time any more. Equipment Included: Vinyl tubing All stainless custom drip tray Brewers Hydrometer Refractometer Custom recycle header Custom keg rebuild socket x2 PH live meter with 3 probes 2 sets pin...

Hello, I've just run into a problem with my regulator. It's less then 5 month old and maybe used on 2 batches. Even when the regulator is dialed down as far as possible, as soon as I turn on the gas pressure starts building up and it doesn't stop till the security valve lets out pressure...

Got lazy and bought a 2 tap kegerator from Bestbuy and I want to have my CO2 and regulators outside of the unit rather than inside. There is a provision for a single hose on the back of the kegerator but I'm wondering if anyone has added a second hose hole? And if so, where did they locate it...

I have a standard MicroMatic Dual Regulator: https://bit.ly/2WQz0oE that I am replacing. Any suggestions on different brands, or specific products would be appreciated. This one has been ok, but I think the second regulator (on the left) has not ever worked that great. It has always had pressure...

Mobile/extra CO2 setup for serving kegged beer. Selling off the remnants of my equipment Pinvalve(Paintball style) CO2 regulator from Keg Connection with ability to set specific psi. https://www.kegconnection.com/pinvalve-paintball-style/ ($58 new) 12 oz Painball Tank ( Empty )...

Hey All, Thank you for reading. I just have a question about my dual gauge regulator... I can't get it to turn down under 20lbs of pressure. I have pulled the relief valve and turn the adjustment down all the way until the knob unscrews but the pressure will still not decrease. Am I doing...

Spent 3 hours setting up my used and had water at 25 psi for 12 hours. Came back this morning and upped the pressure to 50psi and started hearing a leak from this middle valve. I am brand new to this and don't know what the valve is for or how to fix this. This valve leaks at lower pressure now...

$65 shipped. Lightly used, in perfect shape. Sold kegerator. Threaded Pin lock gas connections included.

Recently I got an Air Liquide Blueshield Series 45 Oxygen regulator at a garage sale for $10. I decided to retire it for my CO2 system. I had the inlet nipple replaced. I used Teflon tape and pipe dope to seal all the threads and soap test showed no leaks. However I did the following test which...

I've got a regulator that I picked up used from a local on Craigslist. The pressure adjustment set-screw hole is stripped. Fortunately, the regulator otherwise works OK but I'd like to replace the bonnet. The regulator looks identical to this item...

Hi, First time making cider - I have this standard pressure regulator like most other folks (not this really, but strikingly similar) I've set it to 2.3 bar (35 PSI) and let it sit for some 3 weeks, hoping my 17 C (59 F) cider barrel would carbonate. Result: apart from some nice looking...

I’m new to kegging and only have YouTube vids and threads here on HBT to go off of. I have a couple of quick questions: Why is there a metal piece on the threading of my pressure adjustment knob on my regulator? (See pics below) Is it to keep the knob from moving once I set it? Also, I’ve heard...

Purchased directly from Keg Connection in January 2018 for $73 + shipping. This regulator is essentially brand new. It's been used for a month in my kegerator, zero leaks and performs flawlessly. Comes with MFL fittings and 5/16" barbs. I'll even throw in the ~2' worth of gas tubing I have...

Let me start off by saying I am really starting to hate kegging. I have been brewing for several years now and this past winter I finally finished my bar, purchased a fridge, converted to a kegerator, and acquired all the materials needed to keg. To say I was excited was putting it mildly...

As my thread search yielded no hits, I am starting this one. Could anyone provide me with the dimensions for a Taprite 5-gauge, secondary? As each additional gauge will add the same length, the width of one "add-on" secondary for a Taprite system will work as well. I have a 5-gauge on back...

I bought a Danby kegerator and started using it about 6 months ago. This is my first kegerator but honestly I really don’t think the regulator has ever worked. Tonight I put my refilled co2 tank on the kegerator and for some reason the regulator spikes up to full pressure and then the regulator...

2-#20 Aluminum Co2 $70 each 1-#10 $40 1-Dual tap Stainless Steel (new) $80 1-Single tap Chrome (New) $50 1-Micromatic triple gauge secondary 0-60 psi (new) $100 1-Brewers Best home brew kit with many extras (new) $180 includes $300 plus in equipment.

Hi all, So I've been desiring to test out one of these PicoBrew models and recently took the plunge for $300. It's an interesting little wort maker and I do like the FreeStyle crafting options available. In any case, I wasn't getting the Pro model this low and I already had limited space...

Hey Everyone, I'm fairly new to kegging, just kegged my second batch. Both batches are crazy foamy, after my first batch, I decided to switch out my 5' 3/16" beer line to a 20' line. The longer hose made very little improvement and am now stumped about why this is happening. I am using a pin...

Hi, Folks - I have a leak in the very back of my Corny regulator, at what appears to be the large head of a bolt or screw. I lost a full tank of CO2 overnight, and did the soap test to find the leak - I'm confident as to where it is. The problem is that I can't seem to tighten OR loosen the...