Trouble finding replacement racetrack lid/valve

[pensphreak]

I came across a ball lock keg with an odd racetrack lid. Turns out, the relief valve didn't work and none of my other ball valve relief valves fit, so I ordered a replacement lid from KegOutlet.com (http://www.kegoutlet.com/keg-lid-rec...ack-style.html). Turns out, that lid didn't make a good seal at all, so now I'm back to square one. I took some pictures of the good lid (without the relieve valve) and the incorrect replacement lid (http://imgur.com/a/yQYhu). Does anyone know where I could find a correct replacement valve or lid so I can actually USE this keg?

 

[ubnserved]

I could be wrong because I use ball lock with the same style lid as the one on the left in the last picture. But the one on the right looks like one I have seen on a pin lock keg. I know that on the prv's for the ball locks you can get replacement parts for the valve. Will it unscrew from the new and screw on to the old?

 

[ubnserved]

What is engraved on the side of the keg? I'm just wondering if the keg has been converted from a pin lock to a ball lock. Those are ball lock connections.

 

[day_trippr]

What is engraved on the side of the keg? I'm just wondering if the keg has been converted from a pin lock to a ball lock. Those are ball lock connections.

Pin locks usually have both posts on one side...

Cheers!

 

[pensphreak]

No, the prv will not unscrew from the original lid. The original lid has a prv (female side) that measures 1/2" while the other lid (and all my other ball lock lids) measure 9/16". So regular prv's will not fit

 

[ubnserved]

I just saw an ad for ball lock kegs with lids like yours. They were used but it was ball locks, so they are out there. Did you try ebay?