I am going to be adding some new beer lines to my kegerator tonight. It is a single tower with 2 taps. It is a 4.3 cubic foot fridge that has 2 corny kegs inside and the co2 outside.
Here are the specs:
Beer temp: 41F
Distance from middle of keg up to tap: 30"
Desired vol: 2.5
Serving pressure: 13PSI
Beer line: 3/16" ID
So using all the calculators that I have found, I am coming up with a beer line length of 4 feet. Just wanted to get any thoughts on this before I get started.
I used this beersmith article for the calculation.
Here are the specs:
Beer temp: 41F
Distance from middle of keg up to tap: 30"
Desired vol: 2.5
Serving pressure: 13PSI
Beer line: 3/16" ID
So using all the calculators that I have found, I am coming up with a beer line length of 4 feet. Just wanted to get any thoughts on this before I get started.
I used this beersmith article for the calculation.