Help finding a stainless NPT Y-Fitting

[DesignatedDrinker]

I'm building a stainless immersion cooler using 100' of tube that's going to be two built into eachother. I'm trying to find stainless Y fittings to connect the two "In's" and "Out's" thats either 1/2" FPT or MPT, doesnt matter which because I can get FPT or MPT compression fittings. I have been googling for awhile with no success. Anyone have any resources??

 

[grathan]

Would a tee work, if you turn a tee on its side it almost looks like a wye...

http://www.ebay.com/itm/like/271168879794?lpid=82

 

[DesignatedDrinker]

Do you have a Tee thats dual 3/8 compression to a single 1/2" NPT? Im looking the put a quick disconnect for the in and out line.

 

[Thedutchtouch]

Search for stainless 45 degree threaded lateral. You should likely find what you want that way... http://www.pennusa.com/products/product_catalog/pdf/threadedlateral.pdf.

Alternatively,

Northern brewer sells a 1/2 inch ss FTP T fitting... http://www.northernbrewer.com/shop/s-s-tee-1-2-npt.html

Otherwise (and I am NOT SURE about this) perhaps a stainless wye strainer would work? Simply remove the strainer and use it as a wye?
http://www.smithcooper.com/cat.php?p=74798

 

[DesignatedDrinker]

Search for stainless 45 degree threaded lateral. You should likely find what you want that way... http://www.pennusa.com/products/product_catalog/pdf/threadedlateral.pdf.

Alternatively,

Northern brewer sells a 1/2 inch ss FTP T fitting... http://www.northernbrewer.com/shop/s-s-tee-1-2-npt.html

Otherwise (and I am NOT SURE about this) perhaps a stainless wye strainer would work? Simply remove the strainer and use it as a wye?
http://www.smithcooper.com/cat.php?p=74798

Thanks that first link opened up some ideas

 

[Renoun]

You might see if you can find a chandlery in Beaufort or Wilmington that has SS fittings. You are looking for the place that sells to the commercial fishing fleet or other industrial uses.

 

[budgetbrewing]

Let me know if you found one. If not I will get you a price on one Tuesday.


Sent from my iPhone using Home Brew

 

[DesignatedDrinker]

Let me know if you found one. If not I will get you a price on one Tuesday.


Sent from my iPhone using Home Brew

Havent found one yet, but a price on what?

1/2" NPT y fitting?
or
3/8" Flare x 3/8" Flare x 1/2" NPT y fitting?

 

[grathan]

Do you have a Tee thats dual 3/8 compression to a single 1/2" NPT? Im looking the put a quick disconnect for the in and out line.

http://midwestbev.com/7161.aspx

 

[Jaybird]

Why not do something like these. Cheep and easy

Stainless Tee
and Stainless Street 90

You would end up with 3 1/2" FPT kind of like a Y
Cheers
Jay

 

[budgetbrewing]

1/2 NPT Wye or lateral.


Sent from my iPhone using Home Brew

 

[DesignatedDrinker]

Why not do something like these. Cheep and easy

Stainless Tee
and Stainless Street 90

You would end up with 3 1/2" FPT kind of like a Y
Cheers
Jay

Looks like that could be plan B, thanks.

 

[DesignatedDrinker]

1/2 NPT Wye or lateral.


Sent from my iPhone using Home Brew

Wye