benbradford
Well-Known Member
just recieved mine this week, and am having problems. I followed the wiring diagram correctly and do have minimal experience wiring as I have done some car wiring, stereo and alarm wiring, and worked general construction years ago. i wired it correctly and it would not send any power to either outlet whether on hot or cold. i used a lamp to test the outlets. i eventually even wired it straight to a female end of an extension cord straight from the cool 7 and 8 tabs.
here is the final test wiring setup.
white from outlet to 2
black from outlet to 1
whte from 7 to white extention cord
black from 8 to black extension cord
plugged lamp in and nothing even when the controller had a solid cool light showing
i had the temp on the controller set to 15 with a reading of 21
the delay was set to 3
the variance was set to .3
nothing
i believe that i now have a reasonably priced digital thermometer that only reads celcius
here is the final test wiring setup.
white from outlet to 2
black from outlet to 1
whte from 7 to white extention cord
black from 8 to black extension cord
plugged lamp in and nothing even when the controller had a solid cool light showing
i had the temp on the controller set to 15 with a reading of 21
the delay was set to 3
the variance was set to .3
nothing
i believe that i now have a reasonably priced digital thermometer that only reads celcius