hungrymonkey
Well-Known Member
Here is my plan so far. This will be with 1.5" square tubing. Using hurricane burners and hopefully kettles.
The kettles I found through morebeer are 14" tall. I gave it 3 extra inches for the boil kettle, in case I use a keggle. The cooler mash tun is an approximate 21" for a converted 10 gallon cooler.
I put the boil kettle low. I am contemplating movie it up high enough to clear a carboy to make it easier to transfer.
Thoughts, opinions, or criticism is greatly appreciated.
I do have a mig and the ability to cut the tubing.
The kettles I found through morebeer are 14" tall. I gave it 3 extra inches for the boil kettle, in case I use a keggle. The cooler mash tun is an approximate 21" for a converted 10 gallon cooler.
I put the boil kettle low. I am contemplating movie it up high enough to clear a carboy to make it easier to transfer.
Thoughts, opinions, or criticism is greatly appreciated.
I do have a mig and the ability to cut the tubing.
![brewsculpture.jpg](https://proxy.imagearchive.com/7a1/7a18b040be8a91d2fa37f92931a559f4.jpg)