Bayou Classic SQ14 hose extension

[dbarrm]

Has anyone found a way to extend the hose length of a bayou classic SQ14 regulator hose. I just built myself a gravity brewstand and need to find a way to extend the hose so it can be connected to the tank on the ground.

Dan

 

[TWAL]

Amazon,Problem solved...

 

[dbarrm]

Amazon search found nothing.

 

[Jwin]

This?
http://www.amazon.com/dp/B00192QBPQ/?tag=skimlinks_replacement-20

 

[dbarrm]

So one side of the hose goes on the bottle and the other end attaches to the reg hose that came with the burner?

 

[TWAL]

So one side of the hose goes on the bottle and the other end attaches to the reg hose that came with the burner?

That's generally how extensions work ...

http://www.amazon.com/dp/B00192QBPQ/?tag=skimlinks_replacement-20

 

[Stillraining]

Or if you'd rather leave your regulator on the tank ( My preference) you can just change out the hose with a longer one like thiis

http://www.amazon.com/gp/product/B00D86I6LI/?tag=skimlinks_replacement-20

 

[dbarrm]

Problem is the reg is crimped to the hose.

 

[dbarrm]

That's generally how extensions work ...

http://www.amazon.com/dp/B00192QBPQ/?tag=skimlinks_replacement-20

The hose you linked is for the one lb bottle.

 

[TWAL]

The hose you linked is for the one lb bottle.

There's pages of pages of hoses there ...

http://www.amazon.com/dp/B002UC8MJW/?tag=skimlinks_replacement-20

 

[Stillraining]

Problem is the reg is crimped to the hose.

Then just use a brass coupling between the two hoses. I know for sure its not crimped at the burner. You would not need to buy as long of extension hose that way too.