woollybugger2
Well-Known Member
- Joined
- Feb 14, 2009
- Messages
- 534
- Reaction score
- 3
okay, things were moving along smoothly until I turned on the water for the immersion chiller. At first I thought that the outlet hose had whipped around and hit and stuck to the burner, when I pulled it free I realized that it was the inflow and was melted in half. It sprayed into the hot work (i'm not too worried about that) I Cut it off and turned the water off and reattached the shortened hose and finished up. Other than slicing my finger no major problem..
However when I poured the wort into the bucket I noticed that in the dregs there were some small black pellets. Then I realized that the bottom of my thermometer was broken! Yikes, although some were retained in the pot I'm sure that there are some in the bucket too.
Are they safe? or made out of lead? Arggggggg!!!!!!
However when I poured the wort into the bucket I noticed that in the dregs there were some small black pellets. Then I realized that the bottom of my thermometer was broken! Yikes, although some were retained in the pot I'm sure that there are some in the bucket too.
Are they safe? or made out of lead? Arggggggg!!!!!!