monkeybuttbrewing
Active Member
PID question. Watlow 93aa wiring is giving me issues their manual isn't exactly setup for a carpenter to read, but for an engineer. I would rather ask than smoke the controller.
there isnt much here on watlow p.i.d.s and what was here didn't help much.
going out of the watlow into an omega ssr then to the heating element does anyone actually have leigh terminology of where I connect the post? and unit is running at 110v.
website for their manual http://www.watlow.com/downloads/en/manuals/93e_e_.pdf
ok 4 sensor should actually read 5 on the pid unit drawing of the diagram
there isnt much here on watlow p.i.d.s and what was here didn't help much.
going out of the watlow into an omega ssr then to the heating element does anyone actually have leigh terminology of where I connect the post? and unit is running at 110v.
website for their manual http://www.watlow.com/downloads/en/manuals/93e_e_.pdf
ok 4 sensor should actually read 5 on the pid unit drawing of the diagram