hatepickingnames
Well-Known Member
I have 10 and 12 foot lengths and 1/4 and 3/16. Im gettin co2 bubbles forming in the beer lines and its foaming up my pours. Any hints? Its a 7.0 ge set at 40. 1/4 line is bevlex braided and the 3/16 is vinyl.
hatepickingnames said:I have 10 and 12 foot lengths and 1/4 and 3/16. Im gettin co2 bubbles forming in the beer lines and its foaming up my pours. Any hints? Its a 7.0 ge set at 40. 1/4 line is bevlex braided and the 3/16 is vinyl.
evandena said:I had this problem in one of my keys that was over carbonated.
Good info guys.
I must admit im guilty of effing with the pressures. Im going to get rid of all 1/4 line.
My line temps seem ok as the beer in glass is same as set temp. I notice reduced foam if i blow a bit in a waste cup then fill my pint glass.
Enter your email address to join: