donshizzles Supporting Member HBT Supporter Joined Nov 24, 2008 Messages 215 Reaction score 4 Location Pleasant Hill May 31, 2014 #1 So when screwing taps to their respective shanks, does one use any sort of Teflon tape or is metal on metal ok in this case?
So when screwing taps to their respective shanks, does one use any sort of Teflon tape or is metal on metal ok in this case?
day_trippr The Central Scruuuutinizer HBT Supporter Joined May 31, 2011 Messages 44,531 Reaction score 32,464 Location Stow, MA Jun 1, 2014 #2 A bit of keg lube on the o-ring and on the shank threads will help with sealing and prevent galling, but definitely no tape... Cheers!
A bit of keg lube on the o-ring and on the shank threads will help with sealing and prevent galling, but definitely no tape... Cheers!
OP OP donshizzles Supporting Member HBT Supporter Joined Nov 24, 2008 Messages 215 Reaction score 4 Location Pleasant Hill Jun 1, 2014 #3 Thanks!!!
heckels Well-Known Member Joined Jan 15, 2011 Messages 843 Reaction score 71 Location Sioux Falls Jun 2, 2014 #4 Make sure there actually is an o-ring on the back if your tap. If so, the metal-on-metal of the shank collar on the tap is fine as that is not what is actually sealing. Sent from my iPhone using Home Brew
Make sure there actually is an o-ring on the back if your tap. If so, the metal-on-metal of the shank collar on the tap is fine as that is not what is actually sealing. Sent from my iPhone using Home Brew