Beavdowg
Well-Known Member
Help! I purchased a second cobra tap and associated hoses, etc. so that I could have 2 beers on tap at the same time. Well, I've had nothing but problems with this new tap. Last night I wanted to tap my first IPA brew but could not, for the life of me, get it to pour without producing loads of foam (like 7/8 of the glass worth!). I had the keg on 28psi for about 4 days, in the fridge obviously. I turned the pressure down to 5psi and bled off all the gas out of the keg. From first pour to 5th pour it's all the same, tons of foam. The tubing is clear so I can see that as soon as I stop pouring bubbles begin to form at the tap end AND at the keg end. My tubing is about 2.5-3 ft long approximately.
What's going on here and how can I fix it?
thanks again!
What's going on here and how can I fix it?
thanks again!