Co2 Lines - length, width any difference?

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
akthor

akthor

Well-Known Member
Joined
May 23, 2010
Messages
2,070
Reaction score
186
Location
Litchfield and Brownton
I am going to be assembling the lines for my trashcan kegerator soo and I know that with the beer lines length and diameter of the hoses is important for foam issues but any limits on the gas lines?

I mean do they need to be certain lengths? can the lines going to each keg be a different length ect. ???
 
The size of the CO2 lines won't have any impact on the beer.

FWIW I use 3/16 beer line with MFL fittings for everything. That way I can use any hose anywhere in the system. What was a beer line yesterday can be a "Out to Out" transfer hose tomorrow, and a CO2 line next week. It's pretty handy, and I only have to have one size hose around.
 
Well I can't find a 4 way T fitting so I think I am gonna have to use two 2 ways so the lines could be different lengths. I figured it wasnt an issue but just checking ;)
 

Similar threads

M
1/4" beer line with oxebar keg in regular fridge - Length/foam issues
2
Replies
69
Views
2K
Matheos
M
B
Little carbonation after a week in the keg.
Replies
2
Views
378
doug293cz
doug293cz
B
Foaming issues with kegging
Replies
3
Views
1K
day_trippr
day_trippr
C
Hop Water/Seltzer - Troubleshooting Carbonation and Dispensing
Replies
6
Views
867
danno6102
D
WesBrew
In-line solution to Prevent CO2 bottle leak down ?
2
Replies
54
Views
2K
day_trippr
day_trippr

Latest posts

Back
Top