Search results

To anyone that personally knows Chris Soper please let him know I have sent him a private message regarding the Watermelon Wheat he brews. I'd like to know how much watermelon and the process he uses for the beer. -=Jason=-

Ok my end result is as follows : BK element of 5500 watts HLT element of 4500 or 5500 Watts RIMs tube (I already have a 4500 Watt ULD the currently running on 120V) Two pumps E stop Alarm Volt meter Amp meter Lights for all elements and pumps Amber SYL-2352 PIDS what I...

I ran an Auto-Tune the last two night all night long because I didn't know if the Auto-Tune had completed. I was thinking the display would stop blinking when it was complete hence why I let it run all night long. when in normal Auto mode does the display blink every time the element...

so I just got my brand new www.brewhardware.com 5/8" dip tube and false bottom. I have it hooked up in my MLT and filled it with a few gallons of water above the top of the dip tube. I opened my valve and water tricked out. I filled my 1/2" tubing and connected my pump and turned it on. I had a...

ok so I have a new to me Bobby_M rims tube and i haven't brewed using it yet. what I am trying to figure out is how to best use this new piece of equipment. here's my gear: 3 keggles, 2 pumps, 1 rims tube, 1 NG burner: Mashing in: heat water in HLT to just a few degrees under what I...

so I have a Magic Chef 7.2 Deep Freezer, see my Signature below for the build. well it was working fine up until about 5/6 weeks ago when my keg kicked. I didn't have another keg ready so I unplugged the unit. well this past Saturday I plugged it in and put my keg in there. sunday...

Well after locating my thermometer at 7.25 gallons on my HLT I discovered once I mashed in that it did me no good in measuring my strike water temp because the probe was in not in the water. this single thermometer is serving double duty being used in my HLT and then it is going to get stuck...

so after reading the other 200 page DIY thread about using an old computer fan, hard drive magnets, radio shack potentiometer and a random power supply I attempted to build my own. after many a failed attempts and finally getting a working combination using a 18V JBL power supply I found it was...

so it has come to my attention I would like to have my temperature probe inside of my fermenting vessel well Amazon.com is a gold mine for cheap SS tubing with FREE SHIPPING for PRIME members. They have shorter lengths of tubing as well. 3/16" OD x 60" long $4.82 1/4" OD x 60" Long $4.97...

so I have built my Keezer with Granite tiles its rather heavy to lift and its using the stock hinges for the time being. I just swapped my 5Lb tank out for a 20 Lb tank. It's to tall sit inside my keezer on the floor and the the hump is entirely out of the question. I don't want a HUGE collar...

ok I currently have the 23 tip flame throwing NG Jet burner. I don't get scorching or soot on the bottom of my keggle, but its pretty much on or off nothing in between. I have been toying with the idea of buying 3 more burners for my brew stand. here's the catch... I currently brew with...

ok so on the 22nd of this month I fly out to Tyler for a job interview. its with my current company for an Operations Manager position. I'd be attempting to rent out my house here in Az and rent a place in Tyler. the wife is excited that I'd be making a HUGE jump in my carrier as am I, but what...

SOLD OUT! THERE WILL NOT BE A ROUND 3. PMing ME WILL NOT CHANGE THAT. as I ship I will highlight your name in red. foxrunner drkeds ezzieyguywuf Walker IrregularPulse cox8611 BoxofRain BadgerBrewer Brodeurman69 Cpt_Kirks gunner65 bull8042 midfielder5 Frodo humann_brewing Khan longke Magua...

so I thought I read some there that the CO2 post and Bev Out Post were slightly different. I tried searching and couldn't find a thread so I figured I'd start a new one. The one I am looking for will probably be in the "similar threads" at the bottom after I post this thread. EDIT: HERE IS...

anyone ever order parts from here, the pricing looks fantastic on the beer towers and they have those taps with the lever on the side of them. http://orientequipment.com/orient%20product.htm they have new SS Kegs for $76, but im sure shipping from China would be pretty damn expensive on...

so I'll use this thread to document my keezer build process, but before begin I have a few questions. I have this Magic Chef Keezer I scored at a garage sale for $50 I had not purchased it for a keezer build, but I have and its going to turn into one. I plan on painting it black, and...

ok so I might be getting my hands on some Perlick 2 faucet towers that are glycol cooled. I have no idea about glycol cooling, do I need to use glycol with these towers? They will be sitting right on top of my keezer, can I just use air through the glycol lines instead? -=Jason=-

here is the recipe in question: http://www.brewmasterswarehouse.com/recipe/ee201098/ Included Ingredients Briess Bavarian Wheat Dry Extract 3 lbs, 0 oz Briess Golden Light Dry Extract 2 lbs, 0 oz Caramel Munich 0 lbs, 6 oz Hallertau Pellets, German 1 oz @ 60 mins SAFBREW WB-06 Wheat Beer...

so in trying to finish my keggles so i can get a first brew under my belt I came to the whole "pickup" thing. do I want to go into the center and draw from the very bottom, do i want to get the side, whats better? well I brought home from work a few fittings to test out. 1/2" Male adapter...

ok so after discovering this lovely forum the brewing bug hath bit me and I haven't even brewed my first batch. I have two 1/2 Barrel 15.5 Gal Kegs, tops have already been cut, holes drilled and "Keg Tool" pulled to solder the couplings into. I have the ball valves, couplings, tee's etc for...