Search results

I have four six gallon better bottles, asking $10 a piece for them.

Hey all! Wanted to get some opinions on if its worth trying to upgrade my Fermenator or replace it with a Spike. I have a 14 Gallon Fermenator and want to add fermentation control, which I have priced out at around 170 bucks for the coil and jacket, which is the easy part. The hard part, I...

In the process of converting from propane burners to electric, goal is to be able to do 10 gallons back to back. I've been parting things out for over a year and finally have sometime to make it happen.

I'm in the sourcing phase of converting from propane to electric. I'm building a 50amp HERMS system using MRG 40amp SSR's, MRG-1 D4825. I happened upon several Foxconn 344498-001 rev B heatsinks, looks like this. It's approximately 3x3.5x2.5. My question is, will these provide the necessary...

posted this over in the the mash tun sub but no one had an opinion so I thought maybe it will here.. looking for upgrade out of the classic square plastic Mash Tun. I'm in the middle of converting to an all electric HERMS setup and am looking for any guidance or opinions anyone has between the...

looking for upgrade out of the classic square plastic Mash Tun. I'm in the middle of converting to an all electric HERMS setup and am looking for any guidance or opinions anyone has between the 20 gallon bottom port mash tun from Stout, MT20TW-RF-BO or the 20 gallon InfuSsion from SSbrewtech...

Im in the process of converting to electric from propane and am a little lost on the element controllers. I've set out to build a back to back HERMS system and from previous posts i've settled on getting a Auber DSPR300 for my BK. Now, there seems to be a lot of scattered discussion on the...

So whats the trick? Every time I try to updated a picture the upload manager goes blank and sits there. I've tried different browsers with the same result, Chrome does give me a timeout error though. I looked though the help and support section and I don't appear to be doing anything out of...

picked up a Kenmore 12112 11.1 cu. ft. to replace my Magic Chef which never recovered from a regulator upgrade. Haven't seen many use this model and I wanted a place to collect my thoughts so I thought I would start a thread of my own, nothing more than a wave in the ocean of keezer threads but...

I was fortunate enough to pick up a 7.2cf Home Depot Magic Chef chest freezer years ago and the sadly it has died.. This unit was great because with a footprint less than 3' wide by 2' deep you could get 6 cornys AND a 5lb CO2 tank in it. I found a few of the sizing your chest freezer...

I'm interested in building a recirculating cleaning system simply to save time on cleaning. But I'm having some trouble figuring out proper flow rates and what size pump I need since I will be jumping all my taps together. Do any of you have a formula or chart to reference?

Long story short... I shut down my keezer to replace a faulty regulator and do some general maintenance, plugged it back in and nothing.. I can hear the compressor start up and the idiot lights turn on but it just sits at room temp laughing at me. Now, from what I can tell the brand in this...

Not sure if this is the right place to post this but I'll give it a shot. I recently picked up a set of premium secondary regs (yesterday,) which I already love but space is luxury I don't have in my keezer.. I called MM and they only have the one bracket style so I was wondering if any of...

Not sure if this is the right place to post this but I'll give it a shot. I recently picked up a set of premium secondary regs (yesterday,) which I already love but space is luxury I don't have in my keezer.. I called MM and they only have the one bracket style so I was wondering if any of...

So after dumping 20 pounds of c02 because of a bad regulator. I've decided to change my setup and get a proper secondary regulator bank. I've done some research, read though so threads, made a view calls, and have decided to go with MicroMatic Premium in a three regulator setup and I'm debating...

Has anyone who has installed a Love, or any other temp controller run into issues with condensation inside the collar over time? I'm rebuilding my keezer and am debating the location of the controller, I have see some replace the stock controller by the compressor and others install them into...

So during my brew weekend I was having issues with my temps. I have a Hurricane Burner with what I am guessing is an automatic pressure regulator. I did some basic trouble shooting and think I need to replace the regulator. So, I thought I would see if anyone has any suggestions or...

tonight I kegged a bunch of brew and am now looking for some recipes / ideas on what to brew next. I have lots of time since I just kegged so much so brews that would finish up around June, July or even later would be great. Thanks for the suggestions everyone !!

Thanks in advance for solutions or ideas you come up with! My issue is once I finish carbonating my brew and set the regulator to a serving pressure (under 10psi) after a few hours the pressure will creep up some where between 10 - 12psi. I can bleed off the extra pressure but then the...

Greetings All! I have a Magic Chef 7.2 Cu. Ft. Chest Freezer, the one with the lip the lid or collar locks into. I was wondering if anyone in here has this model and has it setup with either the hinges on the collar / freezer (vs the collar / lid) or has a setup where you can open the keezer...