Search results

I just received my new stainless 240v element for my RIMS tube but I'm struggling with making it fit. I haven't had this big of an issue in the past but half the time I used an element that wasn't ULWD. My tube is 1" inner diameter at 1.30" outer diameter. Am I struggling too much because I...

For years I have gone back and forth on whether or not to create a peltier fermenter cooler/heater that is a plug and play for all of us DIY brewers. I think I have finally cracked the "reversing polarity" code and if it works, I will push to make pre-made control boards. If anyone is interested...

I am running a insulated keg mash tun with a thermometer on the outside. I also run a RIMS tube to maintain the temperature. Last brew day my RIMS was registering a significant temp difference than my mash tun, I'm talking 142 on the RIMS and 154 on the mash tun. Has anyone experienced this before?

Without getting too into the weeds on things, I bought a Inkbird ITC-106VH and burned out the components for the SSR. I bought a replacement and got ended up with a ITC-106RH. The controller is meant for my RIMS tube. Can someone please let me know how the Output Relay is different than the...

I currently have a 120V brew system that I put together to be able to use at rental properties. I am military and move a lot so it didn't give me many options. The issue I am encountering is that I have to run my elements on 2 different circuits in the house. I have to run an extension cord...

Just got my Oak Mash Paddle for Christmas and just got done treating it with Butcher Block Conditioner. The conditioner has mineral oil and beeswax in it. Anyone ever used this stuff? As a side note, after applying a thick layer I hit it with a torch to help it soak in before wiping off the...

Just curious if there is a market for a fermenter temp control tube? I have plans for a simple tube style chiller/heater that utilizes a 12v glycol system. I know that the immersion pro system is out there but I think there is a way to make a more efficient system for cheaper. Could this a...

I just removed everything from a mini fridge and I'm curious about the thermostat removal. What do I need to do to completely bypass the thermostat so that the system can plug into my cool side of the STC-1000? Basically the STC-1000 turns it on and off.

Currently trying to wire my PID and SSR for a RIMS tube and I couldn't be more confused. Why hasn't anyone posted a simple diagram for wiring? So far I understand that the direct power goes into the SSR on the high voltage side and the neutral goes straight to the load. The low voltage side goes...

After doing a lot of research I cannot seem to find any cases where a brewer was able to freeze yeast in a freezer attached to a refrigerator. Is it possible or do I need a chest freezer to pull this off? Also, if it does not freeze thoroughly, will the yeast still be put into a cryogenic...

Im in the process of getting into yeast growing for my own personal use. I am building a 3 stir plate set up and would like to install it in my FermChamber/ aging chamber. My FermChamber is a glass door snapple refrigerator with a ceramic heater. I have computer fans to circulate the air. I keep...

Just built a down and dirty stir plate but using 9v gives me and uncontrollable whirlpool. I have a potentiometer installed but it doesn't adjust the speed. It is a 470k 2W attached to a voltage adapter that can be changed from 3-12v. Is there something I'm missing here? I don't think I can...

Hey there! I have an idea to be a braggot but I would like to have mead going for about a month before I add my wort to make a braggot. It will have a gravity of less than 1.120 overall. I will also be fermenting using dregs from Beard Beer and another Wild ale that I have collected. Is making...

Just bought my supplies to build a RIMS tube so I figured I'd post what I have. I bought all my stainless pipes and fittings from amazon and my element from Lowes. Only thing you would have to figure out is the thermocouple assembly. 1X SS 316 pipe fitting, Hex Plug 1" $2.80 2X 304/304L SS...

I am trying to get into electric brewing and dont have much of an electrical background. I am looking to run a 120V RIMS tube with a PID and SSR but I also want to run 240V boil. If i am installing a potentiometer, will I also need a SSR to control the heating element?

I'm currently looking to build a RIMS but I'm curious about the controllers. Do I need 3 controllers to do each stage or can I just use 1 controller with 3 settings?

Sooo.. I've posted a few times about various ingredients in different posts but I have yet to do anything with them. Here's is what I have stashed let's have some fun and through out some ideas on what to make. Prickly Pear Juice Blue Spruce Tips Dried Lavender Flowers Fresh Mint Dried Red Chile

Shortly after I kegged my beer I ran out of CO2. I am little tight on cash so CO2 isnt a necessity right now. The beer has been in the keg for about 2-3 weeks in the kegerator. Can I prime my keg and siphon into bottles and bottle condition to carbonate or will I have issues with my residual...

Recently the historical beer section in the BJCP has been updated to better reflect some historical beers. I just want get a thread going so that we can feed off of each other to bring these beers back to life using modern techniques. I will start this off by talking about the first beer I plan...

Im looking to get other peoples inputs on CO2 fills / swaps. I have only dealt with AirGas so far and it was $21 for a 5# swap. I have also heard that Way to Grow will fill larger tanks for around $8.