Yoopers New Control Panel

[Homercidal]

We miss Houghton. Talk about going back up this year if Kim wants to attend that Engineering Camp again. But we talked about staying the week and looking around. Notice this will be happening during the summer!

If we come up I'll make it a requirement to stop by and say hi! Maybe bring up two tree beers, eh!

 

[lschiavo]

We miss Houghton. Talk about going back up this year if Kim wants to attend that Engineering Camp again. But we talked about staying the week and looking around. Notice this will be happening during the summer!

If we come up I'll make it a requirement to stop by and say hi! Maybe bring up two tree beers, eh!

Don't forget the second annual Yooper brew day!

 

[Yooper]

You are yoopers, who are you kidding? Don't you guys drink schnapps with breakfast?

Schnapps? No of course not. Homemade wine, for sure but not schnapps. Cripes der hey!

So the same size, just more power?

Not the HLT- I had a cooler HLT but now have a keggle HLT. That will give me extra space in the HLT for 10 gallon brews, plus allow me to do most of my water treatment right in the HLT. Tomorrow's brew needs 16 gallons of water total, but otherwise I'll be using a bit less. It means I won't have to refill the HLT, and can do all of my water additions to the entire batch of water.

Don't forget the second annual Yooper brew day!

Yep- let's talk about that! Homer, you HAVE to come again. You and Xiang and HenryHill made it so much fun! Free pontoon boat rides for everyone!

 

[Homercidal]

Yep- let's talk about that! Homer, you HAVE to come again. You and Xiang and HenryHill made it so much fun! Free pontoon boat rides for everyone!

SWEET! I'll bring my SCUBA gear!

 

[lschiavo]

SWEET! I'll bring my SCUBA gear!

At least plan to get you feet and maybe knees wet!

 

[Yooper]

SWEET! I'll bring my SCUBA gear!

At least plan to get you feet and maybe knees wet!

Very funny. Just for those comments, you'll be riding alone in the kayak.

 

[Homercidal]

Very funny. Just for those comments, you'll be riding alone in the kayak.

Maybe this time I'll get a tour of the SURFACE of your lake! 8P

 

[Yooper]

Maybe this time I'll get a tour of the SURFACE of your lake! 8P

Ok, that's it! You're being relegated to the jon boat and oars. Just make the sound "brrrrrrrm" with your lips to pretend you have a motor as you row along behind us.

 

[lschiavo]

Ok, that's it! You're being relegated to the jon boat and oars. Just make the sound "brrrrrrrm" with your lips to pretend you have a motor as you row along behind us.

Carefully Homer. I'm shutting up now. The boat rides are...refreshing.

 

[ChshreCat]

So, that's Yooper's control panel? I always knew she was really an android. What do the buttons make her do?

 

[lschiavo]

So, that's Yooper's control panel? I always knew she was really an android. What do the buttons make her do?

She will have to wear it as a backpack so she can't see the buttons. Watch out Yoop I'm pushing the "-----" button.

 

[Yooper]

So, that's Yooper's control panel? I always knew she was really an android. What do the buttons make her do?

That's funny right there! :rockin: You'll notice that there is no "off" button!

Ok, so we're brewing tomorrow. The recipe is a total surprise for lschiavo. I have a feeling he won't be surprised that it's an IPA.

 

[Yooper]

Well, it worked great! There were some minor issues, because of my lack of attenation. One was overfilling the MLT during the sparge, because the MLT apparently stopped draining. It made a mess. And then a boilover. Which made a mess. And a few other minor issues, but none of them had anything to do with the equipment!

The control panel is easy to read, easy to use, and I had fun learning about it. I LOVE brewing indoors, and being all-electric. It's awesome!

 

[EricT]

Well, it worked great! There were some minor issues, because of my lack of attenation. One was overfilling the MLT during the sparge, because the MLT apparently stopped draining. It made a mess. And then a boilover. Which made a mess. And a few other minor issues, but none of them had anything to do with the equipment!

The control panel is easy to read, easy to use, and I had fun learning about it. I LOVE brewing indoors, and being all-electric. It's awesome!

Sounds like someone was having a few beers during brew day.

 

[Yooper]

Sounds like someone was having a few beers during brew day.

Yeah, you have to watch lschiavo. He's like that.

 

[lschiavo]

Yeah, you have to watch lschiavo. He's like that.

I guess I did walk away for a refill just before the boilover but I'm the one who heard the MLT overflowing while I was outside for a smoke.

 

[lschiavo]

I actually forgot to take any photos of the final product. Maybe yooper will post a few. Here are a few shots of keg soldering.

Bottom drain on HLT.

HLT element half coupling before cleanup.

HLT probe fitting. I used a brass compression nut.

Herms connections. I changed the inside fittings to 90's when I put the coil in.

Inside of HLT. Low level float, sight tube, element and HERMS.

BK soldered and leak testing.

 

[Homercidal]

Sweet. Can't wait for it to warm up so I can work on electrifying my system. But first I'll have to clean the garage. Maybe put some shelves upstairs so I have some floor space. And finish wiring up the outlets, and replacing the crappy fluorescent lights with something that will actually turn on in the winter.

Well, some of that can wait I guess.

 

[lschiavo]

Sweet. Can't wait for it to warm up so I can work on electrifying my system. But first I'll have to clean the garage. Maybe put some shelves upstairs so I have some floor space. And finish wiring up the outlets, and replacing the crappy fluorescent lights with something that will actually turn on in the winter.

Well, some of that can wait I guess.

I was pretty lucky. There was a chimney in my garage. I found a $50 woodstove and now it is always nice and warm for projects and brewing.

 

[Yooper]

Sweet. Can't wait for it to warm up so I can work on electrifying my system. But first I'll have to clean the garage. Maybe put some shelves upstairs so I have some floor space. And finish wiring up the outlets, and replacing the crappy fluorescent lights with something that will actually turn on in the winter.

Well, some of that can wait I guess.

When you come up for the brewday this year, you can come to the house and see the rig! It's only 12 miles from the cottage.

 

[Yooper]

Here are some photos from the build:

This is looking down into the HLT:


The mounted control panel. To the right of the control panel is the valve for the HLT, which drains from the bottom:


System ready to use:


Boil kettle:

 

[Yooper]

If you look closely at the HLT, you can see the Bobby_M sight glass. At the top of the HLT, you can see the stirrer which is mounted onto a small piece of PVC board across the top of the HLT. The stirrer sits in the middle of the HERMS coil. It's actually produced a vortex in 14.5 gallons, so there aren't any hot/cold spots in the water in the HLT.

 

[Yooper]

This system is working GREAT for me! I've made a couple of 10 gallon batches, and a couple of 5 gallon batches. 10 gallons is easier, in many ways.

The temperature differential between the HLT and the MLT during HERMS is approximately 3 degrees. So, I simply set the HLT at three degrees warmer, and my mash temp is constant at the target. Ramping up to mash out is quick and easy, and I love the system! I love everything about it.

I plan on keeping one pump, but am considering a second. I plan on continuing with the CFC for chilling, and the only "new" thing I'm thinking about is a sight glass/thermometer combo for the MLT. That's only to help me with fly sparging. I'm having trouble getting the in/out exactly the same. It would be easier if I added a sight gauge to the MLT to keep an eye on that. If I"m doing that, I'd just as soon add a thermometer, instead of checking and rechecking with my thermapen.

 

[lschiavo]

There is always that last thing to add...glad to hear it's working. Just do ten gallon batches...beer wont spoil.

 

[AnOldUR]

Do you notice any difference in the quality of the beer between your old system, the first version of your recirculating system and what it's evolved to now?

Damn you. I was perfectly happy with my gravity system. Now you have me thinking about a pump.

 

[Homercidal]

I am so excited about coming up to the UP this summer and checking this out! I'm slowly designing my own rig, and this info has been great at helping me decide how to build mine.

I'm considering making a peristaltic pump at work, instead of using a March style. Simply because it would have a far less chance of ever breaking, would be easier to clean, and have tremendous lift. Not to mention nearly infinitely variable flow rate. Only problems would be difficult to build (compared to buying a March Pump) and probably not less expensive overall.

My planning has been going in spurts. I have to get the garage cleaned and organized so I can do some body work on the Durango, and replace the mufflers on our cars, and make room to work on mustang, as well and just get ready for the summer brewing. But the clean up will also help me be better able to design and build this kind of thing!

I'll have to see exactly what method Leon used to solder those connectors. I like them MUCH more than the weld job I got at work.

 

[adivito]

Quick question. For the element what type of coupler is that you welded in? Is it nps or npt? Im having a little trouble finding a 1" ss npt coupler. AnOldUR once I got my pumps I cant go back.

 

[lschiavo]

Quick question. For the element what type of coupler is that you welded in? Is it nps or npt? Im having a little trouble finding a 1" ss npt coupler. AnOldUR once I got my pumps I cant go back.

It is actually soldered and is a tapered thread stainless half coupling. I used straight threads on my hlt and they work a lot better when installing the element...the element will thread in far enough for the rubber gasket to work. I would recommend straight.

 

[adivito]

Thanks. Where did you find the straight if you dont mind?

 

[lschiavo]

I am so excited about coming up to the UP this summer and checking this out! I'm slowly designing my own rig, and this info has been great at helping me decide how to build mine.

I'm considering making a peristaltic pump at work, instead of using a March style. Simply because it would have a far less chance of ever breaking, would be easier to clean, and have tremendous lift. Not to mention nearly infinitely variable flow rate. Only problems would be difficult to build (compared to buying a March Pump) and probably not less expensive overall.

My planning has been going in spurts. I have to get the garage cleaned and organized so I can do some body work on the Durango, and replace the mufflers on our cars, and make room to work on mustang, as well and just get ready for the summer brewing. But the clean up will also help me be better able to design and build this kind of thing!

I'll have to see exactly what method Leon used to solder those connectors. I like them MUCH more than the weld job I got at work.

I have been hearing about that garage cleanup for a while now

The soldering is really easy with a little practice and the proper flux. I have done less than twenty fittings and I am pretty confident now that the joint wont leak and will look pretty good too. I use a lenox flux from grainger #1uyg7.