What I did for beer today

[jcav]

Today I cleaned 7 kegs with PBW, rinse, acid rinse, all o-rings lubed. I also kegged my Hoppy Czech Pilsner!

 

[grampamark]

Brewed a California Common today. Sort of a spur of the moment brew. I had a couple of other things to do but they were tasks that I could complete while I was waiting on the mash, waiting on the boil, etc. Started about 2:30 and just finished cleaning up, but I got a lot done and made beer at the same time.

Five and a half gallons into the fermenter at .050.

 

[wetmk]

Almost out of HB and my brewing area is slowly being renovated so no brewing in the near future. So I ordered a Sanke coupler. I'll let the pro's fill my fridge for the time being.

 

[T Murph]

Almost out of HB and my brewing area is slowly being renovated so no brewing in the near future. So I ordered a Sanke coupler. I'll let the pro's fill my fridge for the time being.

I feel your pain. Been living in a temporary rental untill we get to move into a new home. We finally get to move in at the end of April and I have big plans for a new electric brewery. So I've been buying sixtels of my favorite craft beers and enjoying having them on tap.

 

[Rish]

Went to the LHBS to drop of a boat load of my wife's empty wine bottles and pick up new hoses and supplies for a couple of upcoming brews. Then picked up a few different beers to have later this week. Really looking forward to trying the 2 on the left for the first time.

 

[Bramling Cross]

Today I cleaned 7 kegs with PBW, rinse, acid rinse, all o-rings lubed. I also kegged my Hoppy Czech Pilsner!

View attachment 765647

Curious about the acid rinse section of your maintenance program. Is that for passivation, or beerstone?

Interested to learn more...also, thanks for the reminder that I need to lube the posts on my O-rings. It's been a while.

 

[Hoppy2bmerry]

It’s a little dark, but I’m calling it a Belgian blond.

 

[jcav]

Curious about the acid rinse section of your maintenance program. Is that for passivation, or beerstone?

Interested to learn more...also, thanks for the reminder that I need to lube the posts on my O-rings. It's been a while.

Absolutely, I use Hot PBW (alkaline) first, then after you are done soaking or using a pump to circulate the PBW I use the same temp Hot water to rinse the kegs (and fermenters for that matter). Then after the Hot rinse I usually spray Star San inside the walls of the keg (or fermenter), this is the acid rinse. Then leave the Star San as this will dry (on the keg or fermenter walls) and or collect in the bottom of the keg. You can store it that way until you need the keg for next time. I do sanitize the keg (and fermenter) right before I need to use them again.

Doing this with both Hot PBW and the Hot water rinse will really help to ward off beer stone. You may see a rainbow type of streak marks on your stainless kegs or fermenters. This process will eliminate that. I had spoken to a rep at Five Star a long time ago and this is what they told me to do. It really works. If you have beer stone already you can buy their beer stone remover and use that as well, and then do this regime when you clean and it will keep it at bay. Hope this helps.

John

 

[Rish]

Assembled my Gigawort electric BK and did a trial run with plain water. Got to the boil very quickly compared to my stovetop so I'm pleased so far, except for the part where I burned the s&!+ out of my fingers because I lifted the lid the wrong way while the boil was going!

 

[JAReeves]

1st pour of the Blackberry Cider. It spent 2 months in a Red Wine barrel before kegging. Slight vanilla flavor, some deeper berries than just the blackberry. Vanilla blackberry nose. Beautiful color. Ready for the Easter guests.

 

[bracconiere]

once again this thread has reminded 'what' i need to do for beer popping up on recents..

when i'm done with eating, gotta get my fermenter kegged for brew day tomorrow...


think of this as a preemptive post i gotta get the barley sprouts in the oven too, with enough time they're cool enough in the morning to brew with....


eat, DRINK, sleep....drink another day....

 

[HutBrew]

What I did for beer today-

Finally got the motivation to detail two forgotten kegs with PBW only to realize that I had detailed one of them several months prior, and the other one had been cleaned out after it had kicked, and looked still had sparkle.

I proceeded to keg my “Full Moon’n” blue moon clone I made for the fiancée into the one that had been detailed a while back. Hydrometer read 1.010 and tasted oh so good. She’ll be reminded of why she puts up with my hobby when it’s good and carbonated.

Question for you folks: the other keg that I rinsed out before storing, do I need to hit it with PBW and scrub the posts/dip tubes after every beer that has gone through it? Or am I good to hit it with some One Step and keg? (I’ve never used star san, always one step, no infections to date with common sense techniques). Feedback is appreciated!

 

[earachemyeye69]

What I did for beer today-

Finally got the motivation to detail two forgotten kegs with PBW only to realize that I had detailed one of them several months prior, and the other one had been cleaned out after it had kicked, and looked still had sparkle.

I proceeded to keg my “Full Moon’n” blue moon clone I made for the fiancée into the one that had been detailed a while back. Hydrometer read 1.010 and tasted oh so good. She’ll be reminded of why she puts up with my hobby when it’s good and carbonated.

Question for you folks: the other keg that I rinsed out before storing, do I need to hit it with PBW and scrub the posts/dip tubes after every beer that has gone through it? Or am I good to hit it with some One Step and keg? (I’ve never used star san, always one step, no infections to date with common sense techniques). Feedback is appreciated!

Unless you’ve got deposits of crud in your keg it will be fine.

 

[earachemyeye69]

Brewed a 10l batch of something dark
Kegged 20l light lager and another 20l of my pure Idaho with Idaho7 hops. Made some mods to the aquarium chiller so I can do temp control on two fermenters at once. Planned out a Mexican Lager.
Something Dark
10 liters
2 kg 2 row
500g Munich
250 gr Rye
115 gr chocolate
115 gr roasted barley
115 gr crystal malt 50l
7 gr Saaz @60
14 gr Saaz at 10
24 gr Saaz at flameout
Diamond Lager yeast

A busy day for sure.

 

[Rudeoso]

Don't know if this counts as doing something for beer, but i will sell beer there.

I bought the local liquor store the day before
yesterday and successfully operated under new ownership yesterday.

 

[JAReeves]

Don't know if this counts as doing something for beer, but i will sell beer there.

I bought the local liquor store the day before
yesterday and successfully operated under new ownership yesterday.
View attachment 766141

Congrats! Hope you do well!

 

[JAReeves]

1st brewday since Feb 5, making a Maris Otter/CTZ Pale Ale SMaSH. Using the Dip Hop technique instead of a whirlpool, as I really want to know what CTZ tastes like since I have another 6# or so from another brewer .

Looks like the extra two weeks in the keg adding some extra clarity to the HB Jasmine Rice lager! Too bad it'll all be gone by the time my guests get done with it at Easter.

 

[govner1]

Started cleaning several kegs that recently kicked and prepped a new Clear Beer Draught Sustem to add to a keg.
This is my 8th and they work very well. No fiddling with weights etc. they just work!

 

[loganklaas]

New tap handles arrived for the extra kegerator I fixed up. Next Friday the Old Rasputin clone will occupy the other tap. That side of the office will be the Dark Side. The other kegerator has a Belgian Pale Ale and a Hazy Pale Ale.

 

[Rudeoso]

Congrats! Hope you do well!

Thank you very much!

 

[seatazzz]

This morning (as in finished about an hour ago) brewed up a Blonde that will ferment on dry Omega Lutra. Just took a peek under the blanket it's wrapped in, and ONE HOUR LATER there are some big yeasty chunks moving around. Pitched at about 85°, expecting good things from this one. Can NOT go wrong with kveik!

 

[bracconiere]

Can NOT go wrong with kveik!

i swear that still makes me think of twerk...

and i finally got my mash tun dumped after thursday's brew day...boil kettle soaking for a scrub here in a bit...

 

[BrewChem]

Brewed a doppelbock. Using the yeast cake from a Münich Dunkel to ferment then it’s going to lager/cellar until the fall.

 

[bracconiere]

Brewed a doppelbock. Using the yeast cake from a Münich Dunkel to ferment then it’s going to lager/cellar until the fall.
View attachment 766233

looks like you're sparging auffly fast?

 

[BrewChem]

looks like you're sparging auffly fast?

Looks like quite a flow from the photo but there’s a tube coming off of the mash tun spigot. There is but a slow but steady stream of sweet maltyness oozing out the end.!

 

[bracconiere]

Looks like quite a flow from the photo but there’s a tube coming off of the mash tun spigot. There is but a slow but steady stream of sweet maltyness oozing out the end.!

i was looking at the angle of the ball valve...

 

[ba-brewer]

Looks like quite a flow from the photo but there’s a tube coming off of the mash tun spigot. There is but a slow but steady stream of sweet maltyness oozing out the end.!

When I first looked at the picture I did not notice the tubing, just thought it was steady full stream coming out of the mashtun.

 

[earachemyeye69]

On Saturday the wife and her friends smashed through the SMASH and I was left with an empty. We all know that an empty carboy is the devil’s playground so I brewed up a batch of “The Mexican” and got it hooked up to my aquarium chiller.
All went well except I didn’t realize how hard connecting a warm batch to the chilled batch would fluctuate the reservoir water temp. I throttled back the flow into the warm batch and let it get down to temp overnight before pitching the yeast. Looks like I need to do some work on creating two zones or else buy a second chiller. Otherwise it’s working great as long as the two batches need the same fermentation temps. In this case they were brewed within two days of each other and they’re both lager yeast so no big deal this time but.......
So we got a half batch of something dark and a full batch of something light bubbling away. I should probably buy another fermenter jacket and save my Lafuma for another winter of keeping my butt warm vs beer cold.

Happy Easter from over here in China
Something light.
2.5 KG Maris Otter
500g Pills
115 Munich
1kg corn
Mash @ 152 for 60 minutes. 168 for 15. Sparge
.5 oz Azacca at boil
Whirflok yeast nutrient
1oz Motueka hops at 10 mins.
SG 1.062
2 packages of 34/70.

 

[rock_n_herm]

I created a recipe for an American Wheat, where I’ll use just Azacca hops.

 

[JAReeves]

Checked on the fermentation , put together two growlers for Easter in the park today, and tied up the hop bines.

The last two days I have been trimming back the grapes to promote better fruiting. All of the books I have on viniculture, and yet, youtube explained what I was supposed to be doing for the last few years, better; and in about an hour, vs. the hours I have spent reading on how to do it right over the last decade.

I am not sure if I am disappointed or happy for the next generation.