What came in the mail for you today?

[schiersteinbrewing]

My Thermapen, Thermoworks PH meter and solutions, Neodymium magnets for my stir plate v2 build. Still waiting an a few parts from overseas to arrive to finish the stir plate.

Also the new side mirrors for my truck, backed out of the garage a little fast the other day and broke my driver's side mirror off. So used the opportunity to upgrade to power folding tow mirrors.

 

[MaryB]

There is a reason I went with a 16' wide garage door! I can back the truck out no worries and room to get lawn equipment out without moving the truck!

 

[RevKev]

Do these hold a whole bag of grain? Been wondering about that!

+1 on that. I was also wondering if the 40 holds a bag of grain...

This is 35lb of my 50lb bag of Briess.. would be tight for whole bag. They have a 60lb variant that I bet could hold a 55lb bag but I do love the seal and screw on lid

View attachment 1473891503816.jpg

 

[Jwin]

This is 35lb of my 50lb bag of Briess.. would be tight for whole bag. They have a 60lb variant that I bet could hold a 55lb bag but I do love the seal and screw on lid

Stand them upright for much more room. Not as cool looking, but...

 

[tbred]

My Brulosophy "My Kind of Science" shirts arrived in the mail today! They are awesome!

 

[woo_pig]

I got my 15 gallon spike kettle . The last major piece for my brewery.

 

[ghise]

The Brew Bag for a mash tun (cooler).

 

[RevKev]

Stand them upright for much more room. Not as cool looking, but...

Exactly. I usually will buy a bag when I need 15+lbs so works for me

 

[Pkrd]

Another keg, because I only have one spare and don't really condition anything. No more suffering through a meh keg and then when there's only three pints left finding it's all of a sudden awesome.
Also ingredients for "northeast style IPA" and a stir bar. Hopefully build the stir plate this weekend.

 

[woo_pig]

1 lb of cluster hops and 1lb of sorachi ace.

 

[Kent88]

a copy of Classic Beer Style Series: Bock. I assume it was cheap because it is a bit out of date, but it still should be a good reference.

 

[MaryB]

2 more fast racks for bottle drying and 8 cans of Fast Pitch yeast starter(yes I can make my own, but the garden is in full harvest and I barely have the energy to keep up with that!).

 

[grrickar]

My Wilser BIAB for my new 50qt mash tun! :thumb

 

[govner1]

A 750 ml bottle of Elevated PSA Wheat Wine & a 750 ml of Brouwerij Van Steenberge de garre Belgian Ale

 

[jrcrilly]

Dunno yet...

 

[Yeastieboy]

Craft Beer Mag

 

[woo_pig]

Dunno yet...

Well?????

 

[schiersteinbrewing]

The grains and hops for Yooper's Dead Guy, BierMuncher's OktoberFAST, and BCS Traditional Bock. Bought some bombers of Rouge Shakespear Stout to harvest some PacMan Yeast from at Spec's this past weekend. The new 120v to 12v converter and box for my new stir plate build.
View attachment ImageUploadedByHome Brew1474597701.102659.jpg
View attachment ImageUploadedByHome Brew1474597881.113947.jpg

 

[jrcrilly]

Well?????

Grainfather. After a series of 90 degree + brew days I decided I need something to use inside when it is too hot or cold to comfortably use the main rig.

 

[RevKev]

Grainfather. After a series of 90 degree + brew days I decided I need something to use inside when it is too hot or cold to comfortably use the main rig.

Nice splurge 😏

 

[murrahjm]

30 pint glasses from amazon. Having a party soon to break in the new keezer and just couldn't bear with serving in plastic cups.

Also a beer line cleaning kit from kegconnection because I'm too lazy to build my own

 

[schiersteinbrewing]

View attachment ImageUploadedByHome Brew1474597451.267497.jpgFast Pitch 1l & 2l kit from NB....nice addition to the 5l flask I have.

 

[pshankstar]

Ball lock conversion kits for two pin lock kegs I scored at a good price! Some new o-ring kits for the used kegs. Lastly, some bottle caps when I bust out the "Last Straw".

Now I need to clean these kegs and get them ready to convert over to ball locks!

 

[arnobg]

My custom Spike Brewing kettle and center inlet chugger pump

View attachment ImageUploadedByHome Brew1474663741.600177.jpg

Got it for almost $50 off just because of a tiny cosmetic weld below the ball valve.

View attachment ImageUploadedByHome Brew1474663774.303595.jpg

 

[jiMithing83]

1 lb Irish moss, a pin lock socket so I can service my o rings, and a Christmas ale kit. Thanksgiving ale kit should arrive tomorrow.

 

[Onkel_Udo]

a pin lock socket so I can service my o rings

22MM or 7/8" box wrench did not work?

 

[sleepspeaking]

So many good things

View attachment 1474678559418.jpg

 

[jiMithing83]

22MM or 7/8" box wrench did not work?

I was using a crescent but last time I half rounded the post off so I got the right tool for the job

 

[Onkel_Udo]

I was using a crescent but last time I half rounded the post off so I got the right tool for the job

Not knocking it. I have found a cheap 12-point box wrench fits all the posts I have run into. I am sure there are exceptions, just have not seen them yet.

I found it odd that the rare 12-point star posts were the same...but kind of make sense.

 

[Anchors_n_Ales]

My new chugger pump arrived yesterday. Piece #1 in my electric conversion!