mikeljcarr
Well-Known Member
- Joined
- Nov 12, 2011
- Messages
- 70
- Reaction score
- 0
So, I had severe foaming problems and learned from posts here that my tubing (3/16") was too short, about 3' long. I thought, from what I read hear, that I needed to increase the length to around 6'. I've done this and the foaming is better, but still too much (half the glass is head). So, before I swag at the proper length again again, can anyone offer some thoughts on how to achieve the best set up.
2- 5 gal soda kegs
Kept around 45"
12-14 psig
2- 5 gal soda kegs
Kept around 45"
12-14 psig