Uhg, my TiltBridge continues to struggle to maintain a connection with a Tilt. It may work for 1-48 hours and it may not work for 1-48 hours (and everything in between).
Full disclosure, I ferment in stainless, inside a beverage cooler style fridge, and the TiltBridge is anywhere from 2-4 feet away from the tilt. (So I know signal strength could be a issue)
I was thinking that this was a Tilt signal strength issue, but I don’t think so.
this is an image of my tilt graph on my Fermentrack build. This Tilt is connected via TiltBridge. For most of the day, it’s very sporadic recording until near the time I took this screenshot. (Logging frequency =15, smoothing window=70)
The next image of the exact same tilt as used above, is from a second Fermentrack build. Now this tilt is connected to Fermentrack via Bluetooth. The RPi running this build is about 4 inches above my TiltBridge (so, further from the Tilt). The Time scale is the same for both images, but you can see with this second build, I’m staying connected to the Tilt and receiving the readings. (Logging Frequency = 15, Smoothing Window = 70)
I‘m a bit at a loss. I really thought it was signal strength related...well, maybe it is?
Any Thoughts? Any Aluminum Foil Rabbit Ears I can make to help the TiltBridge out?