• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

The hell is this?

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
1203-stolen-brain-970-630x420.jpg
 
Welcome to all grain.
(did you have a boil over?:D)

I did because I put the lid on to get more boiling, but 30 seconds after that it was boiling all over. The major issue that I had was when to calculate the OG. God that was a headache. I shot for 1.052 and got 1.052 (70% efficiency) which I think isnt bad for my first all grain.
 
Congrats on your first AG. Looks good!

If you let it sit, with the lid on of course, all the trub will sink to the bottom. Then siphon the clear wort from the top into your fermentor. A little trub carryover (or even a lot) won't do any harm. The less trub, the cleaner your yeast stays for re-use.

If you want more efficiency first place to look is for a finer crush and any mashtun deadspace and leftover wort there.
 
Congrats on your first AG. Looks good!

If you let it sit, with the lid on of course, all the trub will sink to the bottom. Then siphon the clear wort from the top into your fermentor. A little trub carryover (or even a lot) won't do any harm. The less trub, the cleaner your yeast stays for re-use.

If you want more efficiency first place to look is for a finer crush and any mashtun deadspace and leftover wort there.

Lol I should have probably read this before doing it. I just put a funnel in my fermentor and pour it! Pitched nottingham at 25 and now it will ferment at 18. I do want to harvest this yeast though
 
So today I did my first all grain full boil batch. i saw this stuff in the pot while chilling the wort. Any ideas of what it is?

LOL! I felt the same way the first time I did an all grain boil. My wife looked into the batch we made yesterday and asked if the beer was OK when she saw that on the bottom of the brew kettle when we were chilling the wort.

I told her what I was told here at HBT last year, "Well, worse case, it looks like we made beer."

Looking good!
 
You'll get less yeast per puce of slurry, but you can also just make a nice starter. I don't harvest dry yeast, personally, as I find the $4-5 to be not worth the time. I will save some starter of WL or wyeast. It's not impossible to harvest by any means. Just not a very clean harvest.
 
kinda curious of how much trub you have, and pics with settled trub id like to see.... heres my first homebrew... AG.... realized i should have strained it better.... and 2nd pic is after i learned that lesson lol.

20160110_104025.jpg


20160130_102000.jpg
 
kinda curious of how much trub you have, and pics with settled trub id like to see.... heres my first homebrew... AG.... realized i should have strained it better.... and 2nd pic is after i learned that lesson lol.

I didnt know anything about the trub so I didnt even bother straining. I'll post some pictures in the followinf days. So how do you strain it? Mine doesnt have that much though, it looks more like the one you said was strained properly.
 
I did because I put the lid on to get more boiling, but 30 seconds after that it was boiling all over. The major issue that I had was when to calculate the OG. God that was a headache. I shot for 1.052 and got 1.052 (70% efficiency) which I think isnt bad for my first all grain.

It doesn't take long I leave the lid 1/2 on and 1/2 off and turn the burner down a lil
 
kinda curious of how much trub you have, and pics with settled trub id like to see.... heres my first homebrew... AG.... realized i should have strained it better.... and 2nd pic is after i learned that lesson lol.

Nope, you shouldn't have strained it at all. All that trub is mostly beer and what isn't will settle down to the bottom of the fermenter when the yeast are done with whatever part of it that they want, get compacted, and the yeast will settle out on top of it. That half a fermenter of trub will settle down to about half an inch by the time the beer is ready to bottle.
 
Nope, you shouldn't have strained it at all. All that trub is mostly beer and what isn't will settle down to the bottom of the fermenter when the yeast are done with whatever part of it that they want, get compacted, and the yeast will settle out on top of it. That half a fermenter of trub will settle down to about half an inch by the time the beer is ready to bottle.

well i must say that you are completely wrong. that was my first batch of beer ever brewed. and that trub hardened at almost a half gallon of trub... although i did get 7 bottles of beer out of all that trub... but a lot of errors were made... and didnt have all the proper equipment at the time. which is why so much trub... i know trub is not bad for the beer... it just takes away from how brew you get....i would have rather had another half gallon of beer... not trub.. lol ..but thanks though :mug:
 
Congrats on your first AG. Looks good!

If you let it sit, with the lid on of course, all the trub will sink to the bottom. Then siphon the clear wort from the top into your fermentor. A little trub carryover (or even a lot) won't do any harm. The less trub, the cleaner your yeast stays for re-use.

If you want more efficiency first place to look is for a finer crush and any mashtun deadspace and leftover wort there.


I don't agree with this at all. Really? I've never heard of only siphoning the clearer wort.
 
I don't agree with this at all. Really? I've never heard of only siphoning the clearer wort.

I agree with this, if you try to leave the break behind, you will end up with a lot less beer. Yes, there will be more trub in the fermentor after fermentation is complete, but all the solids will compact down a lot more by the end of fermentation than they will in the brew kettle before transfer, so you end up with a lot more beer by transferring the break with the wort.
 
There was actually and ex-beer-iment somewhere on the interwebs about whether to include or ditch the trooooob. In the end, keeping the trub lent a cleaner taste and cleared the beer more better-er. As for me, I don't try to include it nor do I try to leave it in the kettle. After I'm chilled I just open the valve and fill the fermentor 'til it's full. Sometimes I get a lot or all of the trub, sometimes it's fairly minimal.

EDIT: found it The Great Trub
 
Back
Top