crushnbugs
Well-Known Member
OK so I just installed a new Perlick tower and two taps onto my keeper. ITS dispensing ALL FOAM...
I have a corny full of a nice wheat beer that I changed over to the tower and connected via the perlick 3/16 hoses. I had to cut off one end and attach to my ball lock valve that attaches to the keg. This hose is aprox 40 inches long and then attaches to a metal fitting at the bottom of the tower that rises an additional 14 inches. Os Im figuring that I have about 54 inches of line that are 3/16 its connected to CO2 and running at 5 PSI.
Should I lower the PSI of do I have a leak somewhere, if so how to find it?
Thanks!
I have a corny full of a nice wheat beer that I changed over to the tower and connected via the perlick 3/16 hoses. I had to cut off one end and attach to my ball lock valve that attaches to the keg. This hose is aprox 40 inches long and then attaches to a metal fitting at the bottom of the tower that rises an additional 14 inches. Os Im figuring that I have about 54 inches of line that are 3/16 its connected to CO2 and running at 5 PSI.
Should I lower the PSI of do I have a leak somewhere, if so how to find it?
Thanks!