Show us your Kegerator

[Tobor_8thMan]

Taking all the parts off, putting them back on in the correct place. I'm a retired nurse not a mechanic or engineer. Can you properly use an IV machine? Collect all the necessary items to collect and hang and administer blood? Calculate correct dosage of a given med based on wt and age category? Chances are, if you never studied to be a Dr, EMT or nurse you can't..not without having reference books. And that's all I'm saying. Nice to have a reference if you've never done something.

IMO you are over thinking things. Kegging isn't medical or rocket science. One doesn't need mechanic or engineer skills to keg our brew. Do it once and you'll know how to do it. Really not much different than changing a light bulb.

 

[seanjwalker1]

IMO you are over thinking things. Kegging isn't medical or rocket science. One doesn't need mechanic or engineer skills to keg our brew. Do it once and you'll know how to do it. Really not much different than changing a light bulb.

Been brewing more 15 years. Just never kegged.

 

[Tobor_8thMan]

Perhaps these are helpful?
http://www.morebeer.com/articles/kegging_homebrew

http://www.homebrewersassociation.org/how-to-brew/an-introduction-to-kegging-homebrew/

http://www.northernbrewer.com/blogs/kegging-bottling-techniques/choosing-the-correct-keg-parts

http://www.northernbrewer.com/blogs/kegging-bottling-techniques/draft-brewer-kegging-overview

 

[GreenEnvy22]

Don't have a good current photo. Firs tone is fairly recent but you can only see part of it. I was racking wine at the time, taking a photo of that.
Second one is what it looked like when I was first setting it up, with only 1 tap and no temp controller yet.

It's not pretty, but it keeps the beer cold
No space in the house for this, so it's in the garage.

 

[seanjwalker1]

Perhaps these are helpful?
http://www.morebeer.com/articles/kegging_homebrew

http://www.homebrewersassociation.org/how-to-brew/an-introduction-to-kegging-homebrew/

http://www.northernbrewer.com/blogs/kegging-bottling-techniques/choosing-the-correct-keg-parts

http://www.northernbrewer.com/blogs/kegging-bottling-techniques/draft-brewer-kegging-overview

Thank you!

 

[Tobor_8thMan]

You're welcome. Any questions, we probably should begin a new thread instead of hijacking this one, just ask.

 

[seanjwalker1]

You're welcome. Any questions, we probably should begin a new thread instead of hijacking this one, just ask.

Lol absolutely right. My apologies to the Show us your Kegerator powers that be! [emoji108]

 

[Yesfan]

Lol absolutely right. My apologies to the Show us your Kegerator powers that be! [emoji108]

No problem. Just post up some pics when you're done.

I regularly go back and scroll through to look at all the setups. One can get some great ideas on what direction to go or if they are wanting to redo their setup for whatever reason due to what they saw here.

 

[seanjwalker1]

No problem. Just post up some pics when you're done.

I regularly go back and scroll through to look at all the setups. One can get some great ideas on what direction to go or if they are wanting to redo their setup for whatever reason due to what they saw here.

I will. PBW, tap cleaners and brushes, keg float tubes came today, ball lock sockets coming tomorrow. Should be able to start putting it all together!

 

[airbornespoon]

Finally finished building mine so here ya go.
It's a Hotpoint 9.4 freezer. I did epoxy over the top of the bottle caps and chalkboard paint in the middle. Easily holds 6 kegs and a 20# CO2. I have a second regulator in there, that is for my force carbing all the rest run off the other one. I custom made and welded the frame and casters so it is easily moved around for whatever reason.

 

[seanjwalker1]

Finally unboxed the Arctic King kegerator. Fits a 3 and 5 gal keg no problem and my 7 gal stainless fermenter for lagering. This is just the beginning! Gonna lager a batch of helles before I connect 2 tap tower and lines and everything else! Hip hip hooray!! Thank you Mrs wifey Claus!!

 

[seanjwalker1]

New stainless steel look from the before black matte finish.

 

[Blade_Beam]

Just joined and had to post my Keezer build that I just finished. Started as a Hotpoint 7.1 Cu Ft chest freezer and is now a 5 tap Keezer.

 

[seanjwalker1]

Just joined and had to post my Keezer build that I just finished. Started as a Hotpoint 7.1 Cu Ft chest freezer and is now a 5 tap Keezer.

FAB-TASTIC!

 

[Dr_Jeff]

Is there a specific program you're using on your iPad for the tap list? I have an old iPad mini, either first or second generation that is on it's last legs.

Raspberry Pints runs on an old laptop that serves as a server for it.

 

[Dr_Jeff]

Are you saying there are literally bugs in your sour? I don't know much about them but my brother is really into them, and I just recently started looking at recipe's. JW if that is literal or something different, and if that's normally the case or in yours since you're using barrels =)

Microbes, aka bugs.

I've bought numerous types over the years and added dregs from commercial sours that I liked.

 

[hootowl]

 

[gnef]

I like the tap handles! Where did you get them, or did you get them custom machined?

 

[Tobor_8thMan]

View attachment 674192 View attachment 674193

Man, that's very, very nice. Kudos!

 

[hootowl]

I like the tap handles! Where did you get them, or did you get them custom machined?

I make them. Solid Stainless Steel. Message me if interested.

 

[jlb307]

View attachment 674192 View attachment 674193

i think you've become my personal hero!

 

[gnef]

I make them. Solid Stainless Steel. Message me if interested.

You did a great job! I made simpler tap handles already using 3/4" 303 stainless hex stock, so I'm set. I appreciate it though!

 

[gnef]

Here is a picture of mine:

 

[Tobor_8thMan]

Wow. No reason to ever leave home!

 

[hootowl]

Been brewing more 15 years. Just never kegged.

Been brewing for 3 years. Never washed a bottle

 

[Pkrd]

Wow. No reason to every leave home!

Maybe just once, to get some varnish to seal the wood?

 

[SEndorf]

Here is a picture of mine:

Good gawd! That is some serious selection. Very impressive.
Glad to see you chained your CO2, but a 5 pounder? How often do you need to replace? Ever consider a 20?

 

[jseyfert3]

Good gawd! That is some serious selection. Very impressive.
Glad to see you chained your CO2, but a 5 pounder? How often do you need to replace? Ever consider a 20?

I could be wrong, but that looks like a 20 pounder to me. I had a steel 20 lb CO2 tank for some planted aquariums for a few years and that appears to be the same size.

 

[CantWinThisGame]

This is my 60 year old kegerator. Runs like a freakin champ! Picked it up for $100 from Craigslist. Was kind of a challenge getting down the stairs, but well worth the effort! There was one tap in it and I added the second. Tapper handles and chalkboard made by me. The gremlin is there to protect it from beer thieves!

 

[CantWinThisGame]

Just joined and had to post my Keezer build that I just finished. Started as a Hotpoint 7.1 Cu Ft chest freezer and is now a 5 tap Keezer.

Very nice!