I recently installed a Hydrologic RO system to an outside spigot. I ran it for an hour to clear out and calibrate the system. After, I tested the RO versus Tap water with all three calibration lines, heres what i got:
1 Gallon:3 Gallon - RO = 5
1 Gallon:2 Gallon - RO = 7
1 Gallon:1 Gallon - RO = 11
Any idea as to why the RO water wont come to 0 ppm? Does it matter if the ppm is at 5 ppm?
1 Gallon:3 Gallon - RO = 5
1 Gallon:2 Gallon - RO = 7
1 Gallon:1 Gallon - RO = 11
Any idea as to why the RO water wont come to 0 ppm? Does it matter if the ppm is at 5 ppm?
Last edited: