going back to the original question... I will be using canned pumpkin... is 16 ounces enough? at what point in the boil should I add it?
It depends on your recipe....and how much pumpkin you liked.... I was doing a partigyle, coming up with 2 2.5 gallon batches in each batch I used 4, 15 ounce cans/per batch. For a single 5 gallon batch I would use between 6 and 8 pounds.
you did strain the pumpkin out Revvy?
Most of it.
My problem was that my bittering hops were unavailable in pellet, so I had to use whole hops...We were going to rack with an autosiphon, but it kept getting clogged.
In the first batch (the 1.070 batch) I used my normal strainer setup for carboy filling, a large funnel with a medium sized fine mesh kitchen strainer, and it was a frustrating mess, because of the size of the hops... I got most of if strained, but I dumped a lot of it in the fermenter.
For the 1.050 batch, I dug out a kitchen collandar instead of the strainer, this one had larger slits as opposed to the fine mesh of the strainer, and it worked much better.
If you are doing a 5 gallon batch
ferment it in a bucket, and get a nylon paint strainer bag!!! The kind with the elastic that you fit inside the bucket. Then just dup everything in the bucket, lift the bag out and squeeze it. That way you'll get most of the wort out, andf it will seriously be infused with pumpkin and hop goodness...
That's what I will do next time for sure.