- Joined
- Apr 19, 2012
- Messages
- 37
- Reaction score
- 2
I'm building a control panel based on one of PJ's diagrams, but I want to add one of the new Auber DSPR1 for boiling control. I've modified this diagram and wanted to get some feedback to see if I've done wiring correctly.
The idea here is to be able to use the PID to control the elements in both the HLT and the BK. The HLT is has a HERMS coil and so the PID will be controlling the mash temps. For the BK I want to be able to use the PID to set the temp just below boil and then trigger the alarm when the temp is reached. Then switch over to the DSPR1 for boil control for the rest of the boil.
I will do the auto-tuning on the HLT. The BK will have the same element (5500w Camco ULWD) and is the same size/volume and the HLT so I think I should be able to use the PID with the same settings.
Anyway, here's the modified diagram.
Thanks,
Dan
The idea here is to be able to use the PID to control the elements in both the HLT and the BK. The HLT is has a HERMS coil and so the PID will be controlling the mash temps. For the BK I want to be able to use the PID to set the temp just below boil and then trigger the alarm when the temp is reached. Then switch over to the DSPR1 for boil control for the rest of the boil.
I will do the auto-tuning on the HLT. The BK will have the same element (5500w Camco ULWD) and is the same size/volume and the HLT so I think I should be able to use the PID with the same settings.
Anyway, here's the modified diagram.
Thanks,
Dan