Bause of the new electrial system that i have to get used to, i want to run a 2000w and a 1500w element. along with this i will be running my pump off of the same power line as the 1500w line. The reason for this is over here they run a 230v power grid and from what i can see the outlets are all breakered at 10 amp unless specially wired for a dishwasher or washing machine which then generally run a 16 amp breaker. I want both the elements running at the same for quick heating purposes, and then i will have a switch and potentiometer for independent use.
I will have to run two different input powers to my control box for the elements which would be on two different outlets from two different breaker lines here. but that is the easy part since there is an outlet like every 6 ft here. Inside the control box the power would be run to the appropriate elements, i would just like the PID to control the ssr's at the same time.