Thanks I’ll try. I’m brewing this weekend so going to use it without a back up.
Done correctly, it should work. You’ll probably want to get a keyboard and monitor on there to see what’s going on.
Hey there - BrewPiLess is a different project - the thread is over here: BrewPi@ESP8266, no need of RPI and Arduino.
Well that's embarassing.I want you guys to pay attention to the BrewPi guy supporting Fermentrack.
Select the device to control:
View attachment 732545
Then select Configure Control Constants:
View attachment 732546
Then you can define min and max temps:
View attachment 732547
Yes, but I’m not at home to ship them out at the moment, unfortunately.
Cheers for that. I was looking at this board here as I dont need the level shifter.
The mosfet and 10ks are the level shifter.
Ahh ok so dont need the mosfet and 10ks then as I dont use the level shifter.
Ok thanks for that. I will give it a shot.
Yes, 1 for each relay.
I’ve made 2 temp controllers before with fermentrack installed in a ras-berry Pi so I’m basically just building this one the same. I got all my info for it from this thread . Other than that I’ve never really seen a build guide.
![Craft A Brew - Safale S-04 Dry Yeast - Fermentis - English Ale Dry Yeast - For English and American Ales and Hard Apple Ciders - Ingredients for Home Brewing - Beer Making Supplies - [1 Pack]](https://m.media-amazon.com/images/I/41fVGNh6JfL._SL500_.jpg)
bool isValidmDNSName( const char * mdns_name )
{
char c;
while ( (c = *mdns_name++) )
if ( c != '.' && !isalnum(c) )
return false;
return true;
}
bool isValidmDNSName(String mdns_name) {
for (int i = 0; i < mdns_name.length(); ++i) {
if (!isalnum(mdns_name[i]))
return false;
}
return true;
}lib_deps =
https://github.com/tzapu/WiFiManager.git#developmentlib_deps =
https://github.com/tzapu/WiFiManager.git[common]
platform = espressif8266
board = nodemcuv2
framework = arduino
lib_deps =
tzapu/WiFiManager@^0.16.0
;https://github.com/tzapu/WiFiManager.git/*
* Buzzer.cpp
*
* Copyright 2012-2013 BrewPi.
*
* This file is part of BrewPi.
*
* BrewPi is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* BrewPi is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with BrewPi. If not, see <http://www.gnu.org/licenses/>.
*/
#include "Brewpi.h"
#include "Ticks.h"
#include "Pins.h"
#include "Buzzer.h"
// TODO - Implement
#if BREWPI_BUZZER
#if BREWPI_BOARD == BREWPI_BOARD_ESP8266
#define _delay_ms(ms) delayMicroseconds((ms) * 1000)
#endif
#if BREWPI_BOARD != BREWPI_BOARD_ESP8266
#include <util/delay.h>
#endif
#include "FastDigitalPin.h"
#if (alarmPin != 0)
#error "Check PWM settings when you want to use a different pin for the alarm"
#endif
#define BEEP_ON() digitalWrite(alarmPin, LOW);
#define BEEP_OFF() digitalWrite(alarmPin, HIGH);
void Buzzer::init(void){
// set up square wave PWM for buzzer
fastPinMode(alarmPin,OUTPUT);
}
void Buzzer::setActive(bool active)
{
if (active!=this->isActive()) {
ValueActuator::setActive(active);
if (active) {
BEEP_ON();
}
else {
BEEP_OFF();
}
}
}
void Buzzer::beep(uint8_t numBeeps, uint16_t duration){
for(uint8_t beepCount = 0; beepCount<numBeeps; beepCount++){
BEEP_ON();
wait.millis(duration);
BEEP_OFF();
if(beepCount < numBeeps - 1){
wait.millis(duration); // not the last beep
}
}
}
Buzzer buzzer;
#endif#ifndef BREWPI_BUZZER
#define BREWPI_BUZZER 1
#endif
//
#define heatingPin NODEMCU_PIN_D0
#define coolingPin NODEMCU_PIN_D5
#define oneWirePin NODEMCU_PIN_D6 // If oneWirePin is specified, beerSensorPin and fridgeSensorPin are ignored
#define doorPin NODEMCU_PIN_D7
#define alarmPin NODEMCU_PIN_D3
