I just wanted to list the steps and cost breakdown of my keezer build for anyone else looking to build one.
Step 1 - buy a chest freezer. Found a used one on craigslist for $89. Was a good deal during pandemic cause they were a little hard to find.
Step 2: - Bought AIH Used 2-5al corny keg setup - 5 Gallon Ball Lock Keg System w/ Picnic Faucets, 2 USED Kegs - $122
Bought 5# Co2 tank from local shop (Air Affair) - $70
Check to make sure they fit and if a collar is necessary.
Step 3: - They do fit without collar but I would rather not have to lift the lid each time I want to get a beer and I dont want a tower tap on the lid so I will build a collar. So first I removed the freezer lid but removing the hinges. Then I bought a piece of lumber. 1 - 2X8X8 Pine board - $12 - Lowes - Cut board to size and glued ( I had the wood glue) together - I used Silicone $5 to attach to freezer.
Step 1 - buy a chest freezer. Found a used one on craigslist for $89. Was a good deal during pandemic cause they were a little hard to find.
Step 2: - Bought AIH Used 2-5al corny keg setup - 5 Gallon Ball Lock Keg System w/ Picnic Faucets, 2 USED Kegs - $122
Bought 5# Co2 tank from local shop (Air Affair) - $70
Check to make sure they fit and if a collar is necessary.
Step 3: - They do fit without collar but I would rather not have to lift the lid each time I want to get a beer and I dont want a tower tap on the lid so I will build a collar. So first I removed the freezer lid but removing the hinges. Then I bought a piece of lumber. 1 - 2X8X8 Pine board - $12 - Lowes - Cut board to size and glued ( I had the wood glue) together - I used Silicone $5 to attach to freezer.