Well I'm soon going to be moving into a bigger home, with a large rec room which means I'll finally have room for a keezer! I'm trying to figure out everything I need to buy. I already have my manifolds (a 2 port and a 4 port), I have my kegs, 20lb co2 tank, and dual body 3 gauge regulator. This is what's on my list so far:
(1) 10" Wall Mount Drip Tray
(3) Faucet Knob
(4) Gas Ball Lock Gas Disconnect - Barbed
(4) Liquid Ball Lock Disconnect - Barbed
(3) Perlick Forward Seal - 525ss
(3) Hex nuts
(3) Neoprene washers
(3) 3 chrome tail pieces (not sure size?)
(1) Ranco single stage temp. Controller
(3). Chrome shanks 3 1/8"
I'm not sure what size gas tubing I should be using, what's the norm? Also what size liquid tubing I should using, and what length for each tap. I read somewhere if I use 10ft on each tap will eliminate foaming issues given my temps are where they should be. Anyone help me out here? Other than clamps, and repair kits for any kegs that might not be sealing, is there anything else I'm forgetting?
(1) 10" Wall Mount Drip Tray
(3) Faucet Knob
(4) Gas Ball Lock Gas Disconnect - Barbed
(4) Liquid Ball Lock Disconnect - Barbed
(3) Perlick Forward Seal - 525ss
(3) Hex nuts
(3) Neoprene washers
(3) 3 chrome tail pieces (not sure size?)
(1) Ranco single stage temp. Controller
(3). Chrome shanks 3 1/8"
I'm not sure what size gas tubing I should be using, what's the norm? Also what size liquid tubing I should using, and what length for each tap. I read somewhere if I use 10ft on each tap will eliminate foaming issues given my temps are where they should be. Anyone help me out here? Other than clamps, and repair kits for any kegs that might not be sealing, is there anything else I'm forgetting?