notsoragingbeast
New Member
- Joined
- Nov 5, 2020
- Messages
- 2
- Reaction score
- 0
I'm having an issue getting my iSpindel to run correctly with the battery installed. When I switch it on, it pings to Ubidots and goes to sleep, but when it wakes up it just stops and I get a solid blue LED on the Wemos. It works fine with the battery removed and the WEMOs USB plugged in. During my intial build, I installed the battery holder in backwards cause I'm a dingus and I let out some magic smoke. I've since replaced the WEMOS and TP4056, but I'm afraid something else is causing it to have this issue. Could I need to replace the BAT43 diode?
Here is my log:
¦¦a¦q¦¦o¦¦2002ms, result 3
IP: 192.168.0.102
calling Ubidots
{"tilt":35.523,"temperature":76.4375,"battery":4.702816,"gravity":5.341125,"interval":10,"RSSI":-48}
Sender: Ubidots posting
POST /api/v1.6/devices/iSpindel01?token=BBFF-ZLwJEUVuJ4dXv3hUPNyiOIUvgSwziP HTTP/1.1
Host: things.ubidots.com
User-Agent: ESP8266
Connection: close
Content-Type: application/json
Content-Length: 100
HTTP/1.1 200 OK
Server: nginx
Date: Thu, 05 Nov 2020 04:19:10 GMT
Content-Type: application/json
Transfer-Encoding: chunked
Connection: close
Allow: GET, POST, HEAD, OPTIONS
Vary: Origin, Cookie
d1
{"battery": [{"status_code": 201}], "gravity": [{"status_code": 201}], "interval": [{"status_code": 201}], "rssi": [{"status_code": 201}], "temperature": [{"status_code": 201}], "tilt": [{"status_code": 201}]}
0
Final-sleep: 10s; RT: 3847
s$l¦¦|¦d¦|
¦
d¦
b<¦¦¦{¦c¦
b¦¦og¦lno¦¦¦
bx¦¦lrd;lp¦g¦
¦l¦¦
co¦<¦¦s¦c¦¦no¦$¦¦l`¦$`'{¦¦¦g
¦l{¦¦o¦l¦¦
¦A¦¦l`¦o¦
FW 6.3.1
2.2.2-dev(38a443e)
Worker run!
mounting FS... mounted!
reading config file
parsed config:
{"Name":"iSpindel01","Token":"BBFF-ZLwJEUVuJ4dXv3hUPNyiOIUvgSwziP","Sleep":10,"Server":"log.brewfather.net","API":0,"Port":80,"Channel":0,"URI":"","DB":"ispindel","Username":"","Password":"","Job":"ispindel","Instance":"000","Vfact":191.8,"TS":1,"OWpin":12,"POLY":"-0.00031*tilt^2+0.557*tilt-14.054","SSID":"","PSK":"","Offset":[0,0,0,0,0,0]}
offsets not available
Boot-Mode: Deep-Sleep Wake
woken from deepsleep, normal mode
Any thoughts on why it can run succesfully on USB power with the battery removed, but not on the battery alone?
Here is my log:
¦¦a¦q¦¦o¦¦2002ms, result 3
IP: 192.168.0.102
calling Ubidots
{"tilt":35.523,"temperature":76.4375,"battery":4.702816,"gravity":5.341125,"interval":10,"RSSI":-48}
Sender: Ubidots posting
POST /api/v1.6/devices/iSpindel01?token=BBFF-ZLwJEUVuJ4dXv3hUPNyiOIUvgSwziP HTTP/1.1
Host: things.ubidots.com
User-Agent: ESP8266
Connection: close
Content-Type: application/json
Content-Length: 100
HTTP/1.1 200 OK
Server: nginx
Date: Thu, 05 Nov 2020 04:19:10 GMT
Content-Type: application/json
Transfer-Encoding: chunked
Connection: close
Allow: GET, POST, HEAD, OPTIONS
Vary: Origin, Cookie
d1
{"battery": [{"status_code": 201}], "gravity": [{"status_code": 201}], "interval": [{"status_code": 201}], "rssi": [{"status_code": 201}], "temperature": [{"status_code": 201}], "tilt": [{"status_code": 201}]}
0
Final-sleep: 10s; RT: 3847
s$l¦¦|¦d¦|
¦
d¦
b<¦¦¦{¦c¦
b¦¦og¦lno¦¦¦
bx¦¦lrd;lp¦g¦
¦l¦¦
co¦<¦¦s¦c¦¦no¦$¦¦l`¦$`'{¦¦¦g
¦l{¦¦o¦l¦¦
¦A¦¦l`¦o¦
FW 6.3.1
2.2.2-dev(38a443e)
Worker run!
mounting FS... mounted!
reading config file
parsed config:
{"Name":"iSpindel01","Token":"BBFF-ZLwJEUVuJ4dXv3hUPNyiOIUvgSwziP","Sleep":10,"Server":"log.brewfather.net","API":0,"Port":80,"Channel":0,"URI":"","DB":"ispindel","Username":"","Password":"","Job":"ispindel","Instance":"000","Vfact":191.8,"TS":1,"OWpin":12,"POLY":"-0.00031*tilt^2+0.557*tilt-14.054","SSID":"","PSK":"","Offset":[0,0,0,0,0,0]}
offsets not available
Boot-Mode: Deep-Sleep Wake
woken from deepsleep, normal mode
Any thoughts on why it can run succesfully on USB power with the battery removed, but not on the battery alone?