iSpindle Concentrators, Repeaters, Bridges, Hubs

[DuncB]

@ZeSlammy That's great work, no need to be sorry it's great work.

Is the angle ( degree ) update available for the 2 inch display?

 

[ZeSlammy]

@ZeSlammy That's great work, no need to be sorry it's great work.

Is the angle ( degree ) update available for the 2 inch display?

Yes it is.
Still trying to figure out how to display the "°" symbole

 

[JSB241]

Thank you ZeSlammy!
I stumbled onto your GitHub page and set out to build the 1.4" version... no luck. I did ended up getting a 2" version working great, once I found this thread. Please update your GitHub instructions!

I have (3) Ispindels working in rotation! CV files are still an issue.

 

[DuncB]

Yes it is.
Still trying to figure out how to display the "°" symbole

That's great, do I just reinstall via brewflasher and the most upto date version is selected by brewflasher? I couldn't see a specific 2 inch display update on github.
That could easily be due to my lack of knowledge about navigating github.

Great work keep it up.

 

[korev]

Hello
The version allowing the deletion is on the GitHub and I think on BrewFlasher as well (when you log onto the iSpindHub, you'll see a trash can icon next to the name of the file).
View attachment 747454
It's not fully finished (no error handling) but it does the job.

BrewFather data push should be done by Tuesday. Sorry for the delay.

No worries. Thanks for all your good work.

Cheers

 

[ZeSlammy]

That's great, do I just reinstall via brewflasher and the most upto date version is selected by brewflasher? I couldn't see a specific 2 inch display update on github.

As soon as I have a working version, I push it to BrewFlasher.
Got the ° working. Pushing to web services on the way.

 

[korev]

As soon as I have a working version, I push it to BrewFlasher.
Got the ° working. Pushing to web services on the way.

Feedback
This photo shows the Brewflasher 1.4 Green tab rev 0-3 alpha version, the 1.4 Red tab is the same
Perhaps the new font may have caused screen formatting problems for the 1.4 version?

Cheers

 

[ZeSlammy]

Feedback
This photo shows the Brewflasher 1.4 Green tab rev 0-3 alpha version, the 1.4 Red tab is the same
Perhaps the new font may have caused screen formatting problems for the 1.4 version?

Cheers

Yeah saw that. Let me fix it :/

 

[ChrisThomas]

I think the camel bringing my display from China has taken a wrong turn on the Silk Road

 

[DuncB]

@ChrisThomas

Seems very variable the post, some stuff less than 2 weeks but I anticipate everything 28 days plus so my hopes don't get too high.

My screen took from 10th sept to 6th oct from these people to NZ, it's working well.

https://www.aliexpress.com/store/1199788?spm=a2g0s.9042647.0.0.631f4c4dXVBkGQ
Some brew stuff has taken 60 days though and the D1 minis and gyros from

Super seller For Arduino&3D - Amazing prodcuts with exclusive discounts on AliExpress

I'm still waiting for after 6 weeks.

How is Brissle these days, traffic worse?

 

[JSB241]

My 2" display is an OPEN-SMART... works great.. I now only buy D1 Minis straight from the Lolin store on Aliexpress .... some random weird issues with the knock offs.

 

[ChrisThomas]

@ChrisThomas

Seems very variable the post, some stuff less than 2 weeks but I anticipate everything 28 days plus so my hopes don't get too high.

My screen took from 10th sept to 6th oct from these people to NZ, it's working well.

https://www.aliexpress.com/store/1199788?spm=a2g0s.9042647.0.0.631f4c4dXVBkGQ
Some brew stuff has taken 60 days though and the D1 minis and gyros from

Super seller For Arduino&3D - Amazing prodcuts with exclusive discounts on AliExpress

I'm still waiting for after 6 weeks.

How is Brissle these days, traffic worse?

Some stuff I ordered later arrived weeks ago, still electronics but different supplier, never used this supplier before. Ditto with D1 mini's, I always buy from Lolin on Aliexpress but I also use a eBay supplier sometimes which has proven to use quality stuff, and delivers faster.

Brissle traffic, if you can believe it is much worse, public transport is getting more expensive and less "useful". Where we are, they've just build a "Thoughabout" to replace a busy roundabout at the cost of £2.8million. So this works much like a motorway, filter left to turn right, downside is that there's almost no sliproad for the traffic to wait on to turn right. Been in place 3 days, some chaos, can't wait for traffic to return to normal after the holidays and wait for the first person to try and turn right in the right hand lane. Our traffic planners have always been different! One of the best parts of this though is the signage, almost all of it is on the road, so when it's busy you've got no idea of what lane to use to go where, also the junction has 26 sets of traffic lights! The best part though is that one of the local area names they've used nobody knows where it is, but then they probably didn't want to abbreviate "Cock Road", they've replaced it with Mount instead...

 

[ChrisThomas]

Correction £6.8 million total cost of works!

 

[ZeSlammy]

Feedback
This photo shows the Brewflasher 1.4 Green tab rev 0-3 alpha version, the 1.4 Red tab is the same
Perhaps the new font may have caused screen formatting problems for the 1.4 version?

Cheers

Hey there.
Corrected.On Github and through BrewFlasher.

BrewFather later today.

 

[wd16261]

I've installed the latest version for the 1.7" and I came up with some issues that you probably already know:
1. When I delete the default file ispindel032.csv I'm redirected to a page 'File Not Found.' but when I come back to the iSpindHub de file is deleted.
2. I'm missing the angle information on the website:

It would be nice to see the Angle information also.

3. Downloading the log files does not work, when I check the download process I see this:

 

[ZeSlammy]

Yeah I'm aware of those issues.
- Angle on the Web : Will add
- No error after deletion : will try and do
- Downloading : this one seems tricky ..

 

[ZeSlammy]

Angle on the Web : Done

Deletion brings you back to the home page.

I won't tackle download, I'd rather finish the BrewFather stuff


Not commited to BrewFlasher yet. On GitHub though

 

[korev]

Thanks to ZeSlammy and using the version on GitHub, 6 Nov. I have had a play in the screen.cpp file and reformatted the screen display to suit my 1.44" TFT using the Sangras fonts and removing the lines, which to me, at least, seemed to add clutter.
Noting In Screen.h line 11 0xF81F // magenta 0xF81F was 0xF8FF resolved a compilation error
I used my old iSpindel which, I think has the equation configured to report in Plato. Please ignore the WHITE_[SG} label which looks wrong.

Perhaps another item for the ToDo list is to select between SG and Plato?

Cheers

 

[DuncB]

Thanks to ZeSlammy and using the version on GitHub, 6 Nov. I have had a play in the screen.cpp file and reformatted the screen display to suit my 1.44" TFT using the Sangras fonts and removing the lines, which to me, at least, seemed to add clutter.
Noting In Screen.h line 11 0xF81F // magenta 0xF81F was 0xF8FF resolved a compilation error
I used my old iSpindel which, I think has the equation configured to report in Plato. Please ignore the WHITE_[SG} label which looks wrong.

Perhaps another item for the ToDo list is to select between SG and Plato?

Cheers

That looks nicely formatted, I have a spare bit of screen real estate on the 2 inch display with the latest update. The different colours seem to be a good enough distinguisher between the data rather than needing the added lines. Hoping that font change and rearrangement will cross to the 2 inch display.
My spindel is just a test one so the gravity is all off as well.

 

[ZeSlammy]

Thanks to ZeSlammy and using the version on GitHub, 6 Nov. I have had a play in the screen.cpp file and reformatted the screen display to suit my 1.44" TFT using the Sangras fonts and removing the lines, which to me, at least, seemed to add clutter.

Can you send me your .cpp file ?

Noting In Screen.h line 11 0xF81F // magenta 0xF81F was 0xF8FF resolved a compilation error

I don't have it in screen.h (Magenta I mean). It's coming from the main TFT_eSPI.h file

Perhaps another item for the ToDo list is to select between SG and Plato?

It displays whatever the iSpindel is sending back. But yes, I can check the value and display SG or °P or propose an option to chose what to display.


Regarding the whole display rearrangement, I will change my approach.
And optimize for each size instead of trying and have a "generic" file.
Got a 4 days week end ahead, should be able to get some work done.

 

[korev]

Can you send me your .cpp file ?


I don't have it in screen.h (Magenta I mean). It's coming from the main TFT_eSPI.h file


It displays whatever the iSpindel is sending back. But yes, I can check the value and display SG or °P or propose an option to chose what to display.


Regarding the whole display rearrangement, I will change my approach.
And optimize for each size instead of trying and have a "generic" file.
Got a 4 days week end ahead, should be able to get some work done.

Yes, have sent screen files
I think that an option to select display in P or SG would be useful.

Cheers

 

[DuncB]

Thanks @ZeSlammy , using all the screen realestate would be great on the 2 inch screen, then I won't need to hunt for my glasses!! It's still great though.

 

[ChrisThomas]

My camel from China has finally arrived! 1.77" display, connected to D1mini, connected to WiFi, changed configuration on spare iSpindel and all working! First time!

My task this afternoon is to configure iSpinHub to forward to Fermentrack. After watching an exciting weekend of International Rugby, this is a good weekend!


Chris

 

[ZeSlammy]

My task this afternoon is to configure iSpinHub to forward to Fermentrack. After watching an exciting weekend of International Rugby, this is a good weekend!

I can confirm it was an awesome Rugby weekend.
As far as forwarding, it's not done yet, hit a snafu with the periodic jobs. I'm on it though

 

[ChrisThomas]

A good rugby weekend or all 6 Nations, I don't think that's ever happened before!

I thought I'd configured everything, but didn't seem to work! Celebrate the win before getting back to this! Sorry @DuncB

 

[ChrisThomas]

Only comments I can make so far is that I think I'd prefer the iSpindel ID on the top line and a posssible change in font to a less bold appearance. Seems to do what it says on the tin otherwise.

 

[ZeSlammy]

Update coming soon (like Wednesday)
- Push to BrewFather \o/ (Works for one iSpindel, debugging to make it work for more than one)
- Potential changes on screen display

 

[ChrisThomas]

Christmas arrives early?

 

[DuncB]

Fantastic can't wait.
Just fitted my smartpid to the Guten so some more configuring on that side to do. I'll have to learn brewfather as it can integrate with that. More challenges ahead.

 

[DaveS]

@ZeSlammy Did you perhaps have a chance to add push to brewpiless functionality yet ?
Cheers for all your efforts !