InkBred 308 For Keg Temp Issue?

[SanduskySerpents]

I got an InkBird 308 to control kegerator temp and i set my target temp to 45F and plugged it into the cool side of the plugs, nothing plugged into the heat. set up for a 3degree swing with 3 min compressor delay. i woke up this morning and the temp is at 25F the heat led is illuminated and its still kicking on the Kegerator?

 

[PlinyTheMiddleAged]

Sounds like it is plugged into the wrong side. I'd try plugging something into each outlet - like two lamps. Hold the temp probe in your hands and make sure the cold side lamp lights up when the temp goes over the limit. You might have to wait for the delay to let it turn on. Cool the probe down and make sure the heater side lamp lights up.

Good luck!