Inkbird ITC-100VH output

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

floridave_

New Member
Joined
Oct 25, 2020
Messages
3
Reaction score
0
Location
Edmonton, Canada via Florida
I have a Inkbird ITC-100VH PID that has been working flawless for about a dozen batches.
Today I have no output from the SSRs. It does light up and reads the temperature probe just fine. The output pilot light is on and the run light is on as well. I don't have any voltage on the SSR output. What is the common output voltage? Anything else to check? It worked fine last weekend.
 
The output voltage (going to the SSR) from the PID is 12VDC. Most SSRs have an LED that lights up indicating if it is getting input voltage. If this LED is on, and the SSR is not passing AC voltage, then you have a bad SSR. BTW, I think you have the PID in manual mode if you have the RUN light on. Check the manual.
 
Back
Top