how long to apply O2 while transferring?

[Pdaigle]

I have a blichmann oxygen flow regulator that I haven't used yet and I'm wondering what flow and how long to apply o2 while transferring?

 

[GoeHaarden]

I have a blichmann oxygen flow regulator that I haven't used yet and I'm wondering what flow and how long to apply o2 while transferring?

The manual:
http://www.blichmannengineering.com/sites/default/files/Oxygen Flow Regulator Manual V1.pdf

States:
- ANVIL™ O2 Wand setting recommendation: 1 LPM per 5.5 gal of wort, stirring for 1.5 min. For 10 gal batches increase the time to 2 min at 1 LPM.

- Blichmann Engineering™ Inline Oxygenator setting recommendation: 0.5 LPM at 1 GPM of wort flow and 0.75 LPM at 2 GPM of wort flow. Ensure you have a hose long enough (about 6-8 ft) to allow enough contact time for the oxygen to dissolve. It is normal for some large bubbles to pass through the hose.

 

[Pdaigle]

not sure if this help me or not but what about if I have 35 gallons of wort?

 

[GoeHaarden]

Do you have the Blichmann Inline Oxygenator???

 

[Pdaigle]

I have this one https://morebeerpro.com/products/stainless-inline-oxygenation-assembly.html

 

[GoeHaarden]

So you have an inline oxygenation stone? And not the Blichmann oxygen flow regulator as you stated in your OP?

You will need a regulator....

 

[Pdaigle]

I also have the regulator

 

[GoeHaarden]

Sooo...like the manual says. Set your regulator to 0.5 LPM at 1 GPM of wort flow or 0.75 LPM at 2 GPM of wort flow.

 

[Pdaigle]

for the whole time tranferring?

 

[GoeHaarden]

It would appear so...

You're brewing how much beer?

 

[Pdaigle]

35 gallons