Regulation
Well-Known Member
Price to buy system new 6000 - My price 3000
Equipment is well used and fully operational.
Kettles have some rust here and there, but will likely come out with some elbow grease.
No chiller included. Have a stout CFC I would include at additional cost.
and no the SS brewtech cold side equipment is not included.. Could be at additional cost
These are the newest versions - not sure mine are identical
20 Gallon Hot Liquor Tank - with Herms Coil, Tangential Inlet, Laser Level Markings (Electric) - 800
https://conical-fermenter.com/20-gallon-hot-liquor-tank-TI.html?cat=14
20 Gallon Brew Kettle - with Flat Bottom and Trub Dam (Electric) - 600
https://conical-fermenter.com/21-Gallon-Electric-Brew-Kettle.html?cat=14
20 Gallon Mash Tun (with Recirculating Fitting, Bottom Outlet) - 600
https://conical-fermenter.com/20-Gallon-Mash-Tun.html?cat=14
STANDARD 30A ELECTRIC BREWERY CONTROL PANEL (PRE-ASSEMBLED) - 2000
https://shop.theelectricbrewery.com...s/standard-30a-electric-brewery-control-panel
30A ELECTRIC BREWERY CONTROL PANEL POWER CORD (PRE-ASSEMBLED) - 90
https://shop.theelectricbrewery.com...ts/control-panel-power-cord-30a-pre-assembled
ELECTRIC BREWERY TEMPERATURE PROBE, 1.5" TRI-CLAMP (PRE-ASSEMBLED) 80 x 3 = 240
https://shop.theelectricbrewery.com...1-5-tri-clamp-temperature-probe-pre-assembled
5500 W heating elements with cords 200 x 2 = 400
https://ebrewsupply.com/products/co...gmZQB7WmDhS1068KHK1meTnPXLzztZgUaAg6fEALw_wcB
X-Dry Series Tri-Clamp Chugger Pump (Center Inlet) - Stainless Steel - 260
https://www.morebeer.com/products/x...hugger-pump-center-inlet-stainless-steel.html
CHUGGER MAX PUMP 115/230V STAINLESS CENTER INLET PUMP WITH 1.5" TC PORTS (TRI-TCPSSMAX-CI) - 400
Mine is an older version
https://www.brewhardware.com/product_p/chuggertri-tcpssmax-ci.htm
Valves, triclamps, fittings, etc = >>500
Silicone hose - Free
Hop rocket / filter = add 500 not included
Equipment is well used and fully operational.
Kettles have some rust here and there, but will likely come out with some elbow grease.
No chiller included. Have a stout CFC I would include at additional cost.
and no the SS brewtech cold side equipment is not included.. Could be at additional cost
These are the newest versions - not sure mine are identical
20 Gallon Hot Liquor Tank - with Herms Coil, Tangential Inlet, Laser Level Markings (Electric) - 800
https://conical-fermenter.com/20-gallon-hot-liquor-tank-TI.html?cat=14
20 Gallon Brew Kettle - with Flat Bottom and Trub Dam (Electric) - 600
https://conical-fermenter.com/21-Gallon-Electric-Brew-Kettle.html?cat=14
20 Gallon Mash Tun (with Recirculating Fitting, Bottom Outlet) - 600
https://conical-fermenter.com/20-Gallon-Mash-Tun.html?cat=14
STANDARD 30A ELECTRIC BREWERY CONTROL PANEL (PRE-ASSEMBLED) - 2000
https://shop.theelectricbrewery.com...s/standard-30a-electric-brewery-control-panel
30A ELECTRIC BREWERY CONTROL PANEL POWER CORD (PRE-ASSEMBLED) - 90
https://shop.theelectricbrewery.com...ts/control-panel-power-cord-30a-pre-assembled
ELECTRIC BREWERY TEMPERATURE PROBE, 1.5" TRI-CLAMP (PRE-ASSEMBLED) 80 x 3 = 240
https://shop.theelectricbrewery.com...1-5-tri-clamp-temperature-probe-pre-assembled
5500 W heating elements with cords 200 x 2 = 400
https://ebrewsupply.com/products/co...gmZQB7WmDhS1068KHK1meTnPXLzztZgUaAg6fEALw_wcB
X-Dry Series Tri-Clamp Chugger Pump (Center Inlet) - Stainless Steel - 260
https://www.morebeer.com/products/x...hugger-pump-center-inlet-stainless-steel.html
CHUGGER MAX PUMP 115/230V STAINLESS CENTER INLET PUMP WITH 1.5" TC PORTS (TRI-TCPSSMAX-CI) - 400
Mine is an older version
https://www.brewhardware.com/product_p/chuggertri-tcpssmax-ci.htm
Valves, triclamps, fittings, etc = >>500
Silicone hose - Free
Hop rocket / filter = add 500 not included