• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

For Sale Houston, TX - 20 Gallon Stout Electric turnkey hot side brewery

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Regulation

Well-Known Member
Joined
Jun 5, 2011
Messages
150
Reaction score
2
Location
Kingwood
Price to buy system new 6000 - My price 3000

Equipment is well used and fully operational.

Kettles have some rust here and there, but will likely come out with some elbow grease.

No chiller included. Have a stout CFC I would include at additional cost.

and no the SS brewtech cold side equipment is not included.. Could be at additional cost

These are the newest versions - not sure mine are identical

20 Gallon Hot Liquor Tank - with Herms Coil, Tangential Inlet, Laser Level Markings (Electric) - 800

https://conical-fermenter.com/20-gallon-hot-liquor-tank-TI.html?cat=14
20 Gallon Brew Kettle - with Flat Bottom and Trub Dam (Electric) - 600

https://conical-fermenter.com/21-Gallon-Electric-Brew-Kettle.html?cat=14
20 Gallon Mash Tun (with Recirculating Fitting, Bottom Outlet) - 600

https://conical-fermenter.com/20-Gallon-Mash-Tun.html?cat=14
STANDARD 30A ELECTRIC BREWERY CONTROL PANEL (PRE-ASSEMBLED) - 2000

https://shop.theelectricbrewery.com...s/standard-30a-electric-brewery-control-panel
30A ELECTRIC BREWERY CONTROL PANEL POWER CORD (PRE-ASSEMBLED) - 90

https://shop.theelectricbrewery.com...ts/control-panel-power-cord-30a-pre-assembled
ELECTRIC BREWERY TEMPERATURE PROBE, 1.5" TRI-CLAMP (PRE-ASSEMBLED) 80 x 3 = 240

https://shop.theelectricbrewery.com...1-5-tri-clamp-temperature-probe-pre-assembled
5500 W heating elements with cords 200 x 2 = 400

https://ebrewsupply.com/products/co...gmZQB7WmDhS1068KHK1meTnPXLzztZgUaAg6fEALw_wcB
X-Dry Series Tri-Clamp Chugger Pump (Center Inlet) - Stainless Steel - 260

https://www.morebeer.com/products/x...hugger-pump-center-inlet-stainless-steel.html
CHUGGER MAX PUMP 115/230V STAINLESS CENTER INLET PUMP WITH 1.5" TC PORTS (TRI-TCPSSMAX-CI) - 400
Mine is an older version

https://www.brewhardware.com/product_p/chuggertri-tcpssmax-ci.htm
Valves, triclamps, fittings, etc = >>500

Silicone hose - Free

Hop rocket / filter = add 500 not included
 

Attachments

  • brew1.jpg
    brew1.jpg
    57.9 KB · Views: 0
  • brew2.jpg
    brew2.jpg
    68.6 KB · Views: 0
  • brew3.jpg
    brew3.jpg
    62.2 KB · Views: 0
  • brew4.jpg
    brew4.jpg
    61 KB · Views: 0
  • brew5.jpg
    brew5.jpg
    67.7 KB · Views: 0
  • brew6.jpg
    brew6.jpg
    60.5 KB · Views: 0
  • brew7.jpg
    brew7.jpg
    47.8 KB · Views: 0
If the kettles sold i may be interested in selling the panel separate. I am still brewing on the system so not looking to part out unless the kettles sell.
 
Back
Top