Sharkman20
Well-Known Member
I added about 1 tsp of gelatin to my 5 gallon batch to help clear it, and it's doing something strange. The top 5 inches of beer is perfectly clear, and at the 5 inch mark there is a very distinct line of separation where it has almost layered out and everything below that line is still somewhat cloudy. Also, there are numerous small parts floating inside where it looks almost like some of the gelatin reformed and attached to some of the still suspended yeast and is just hanging out like a little jellyfish. I figured I'd give it some more time, but now it is on day 4 and the "line" has not moved or cleared any more than it was on day 2. Any ideas?
When I prepared the gelatin, I used 2 cups of water and heated on the stove to almost boiling before stirring in the gelatin and letting it completely dissolve. I let it cool to around 110 degrees before adding it into the fermenter.
When I prepared the gelatin, I used 2 cups of water and heated on the stove to almost boiling before stirring in the gelatin and letting it completely dissolve. I let it cool to around 110 degrees before adding it into the fermenter.