HItransplant
Well-Known Member
Found another thread from a year ago re: this, but the question was never answered...so I thought Id ask again.
I have a new 10 gal BK and dremel with engraving tool.. Im thinking the best way to measure out volume in the BK is by marking the inside with the engraving tool.. a little line and a number.
the engraving tool should minimize the depth of the cut, preventing going all the way through the side. And, since I will be boiling liquid in it for at least 60 min each time I brew, there shouldnt be any trouble with unwanted critters hangin around in the marks.
anyone ever do this? success? failure?
thoughts?
thanks guys and gals.
I have a new 10 gal BK and dremel with engraving tool.. Im thinking the best way to measure out volume in the BK is by marking the inside with the engraving tool.. a little line and a number.
the engraving tool should minimize the depth of the cut, preventing going all the way through the side. And, since I will be boiling liquid in it for at least 60 min each time I brew, there shouldnt be any trouble with unwanted critters hangin around in the marks.
anyone ever do this? success? failure?
thoughts?
thanks guys and gals.