Hi Guys,
I am very new to this kegerator thing and I just had my system set up today. I have a taprite regulator right now with 1 tap on a 5lb . This is the one with the big red knob. When I got this 5lb tank filled, it was at the lower end of the green "full" range. However, just after 6 hours of installing the system, the regulator shows that the tank has reached half way through the CO2. I feel that this is way too fast for the CO2 to be used up. We poured no more than a few beers during this time.
When I checked it, there's a hissing sound within the regulator. It seems like the sound is coming from the red knob between the two meters area. Is this supposed to have a sound? I have checked my connection with my CO2 and lines and they seem to be secured (with tools). There were no sound coming from those areas too.
The sound stops when I turn the red knob to close. However, it doesn't stop if the red knob is turned to the right (open) and even if the lever on the regulator is closed.
My question is, is this a faulty regulator? I don't want to keep on refilling this tank like this because the only place I could find is 15 miles away with heavy traffic during the day.. Thanks in advance!
EDIT: I used a rag with soupy water and tried all the connections, I did not see any leaks on the entire regulator (back side included). However, I looked at the regulator meter again and it shows a much higher reading now. It if near the Green "full" area now, but still 2 clicks under it. This was much better than before where it was near the Red area. Might this have been the cold temperature causing the reading to be low? I have no idea what is going on.
I am very new to this kegerator thing and I just had my system set up today. I have a taprite regulator right now with 1 tap on a 5lb . This is the one with the big red knob. When I got this 5lb tank filled, it was at the lower end of the green "full" range. However, just after 6 hours of installing the system, the regulator shows that the tank has reached half way through the CO2. I feel that this is way too fast for the CO2 to be used up. We poured no more than a few beers during this time.
When I checked it, there's a hissing sound within the regulator. It seems like the sound is coming from the red knob between the two meters area. Is this supposed to have a sound? I have checked my connection with my CO2 and lines and they seem to be secured (with tools). There were no sound coming from those areas too.
The sound stops when I turn the red knob to close. However, it doesn't stop if the red knob is turned to the right (open) and even if the lever on the regulator is closed.
My question is, is this a faulty regulator? I don't want to keep on refilling this tank like this because the only place I could find is 15 miles away with heavy traffic during the day.. Thanks in advance!
EDIT: I used a rag with soupy water and tried all the connections, I did not see any leaks on the entire regulator (back side included). However, I looked at the regulator meter again and it shows a much higher reading now. It if near the Green "full" area now, but still 2 clicks under it. This was much better than before where it was near the Red area. Might this have been the cold temperature causing the reading to be low? I have no idea what is going on.