It called for cascade perle and magnum. I do not know what the difference is as my LHBS never has the California yeast which is why I have always had to substitute. Here is the recipie:
SNPA CLONE
A ProMash Brewing Session Report
--------------------------------
Recipe Specifics
----------------
Batch Size (Gal): 6.50 Wort Size (Gal): 6.50
Total Grain (Lbs): 12.50
Anticipated OG: 1.053 Plato: 13.11
Anticipated SRM: 8.0
Anticipated IBU: 37.0
Brewhouse Efficiency: 77 %
Wort Boil Time: 70 Minutes
Actual OG: 1.053 Plato: 13.16
Actual FG: 1.011 Plato: 3.17
Alc by Weight: 4.21 by Volume: 5.39 From Measured Gravities.
ADF: 75.9 RDF 63.2 Apparent & Real Degree of Fermentation.
Actual Mash System Efficiency: 79 %
Anticipated Points From Mash: 53.07
Actual Points From Mash: 54.22
Pre-Boil Amounts
----------------
Evaporation Rate: 18.00 Percent Per Hour
Raw Pre-Boil Amounts - only targeted volume/gravity and evaporation
rate taken into account:
Pre-Boil Wort Size: 8.23 Gal
Pre-Boil Gravity: 1.042 SG 10.46 Plato
With sparge water, mash water, additional infusions, vessel losses, top-up
water and evaporation rate recorded in the Water Needed Calculator:
Water Needed Pre-Boil Wort Size: 7.75 Gal
Water Needed Pre-Boil Gravity: 1.045 SG 11.08 Plato
Formulas Used
-------------
Brewhouse Efficiency and Predicted Gravity based on Method #1, Potential Used.
Final Gravity Calculation Based on Points.
Hard Value of Sucrose applied. Value for recipe: 46.2100 ppppg
% Yield Type used in Gravity Prediction: Fine Grind Dry Basis.
Color Formula Used: Morey
Hop IBU Formula Used: Tinseth
Grain/Extract/Sugar
% Amount Name Origin Potential SRM
-----------------------------------------------------------------------------
8.0 1.00 lbs. Crystal 60L America 1.034 60
92.0 11.50 lbs. Pale Malt(2-row) America 1.036 2
Potential represented as SG per pound per gallon.
Hops
Amount Name Form Alpha IBU Boil Time
-----------------------------------------------------------------------------
0.50 oz. Magnum Pellet 13.60 25.4 60 min.
0.50 oz. Perle Pellet 7.70 7.3 30 min.
1.00 oz. Cascade Pellet 5.80 4.3 10 min.
2.00 oz. Cascade Pellet 5.45 0.0 0 min.
Yeast
-----
S-05, US-56, 1056 or WL 001
Mash Schedule
-------------
Mash Type: Single Step
Heat Type: Direct
Grain Lbs: 12.50
Water Qts: 16.00 - Before Additional Infusions
Water Gal: 4.00 - Before Additional Infusions
Qts Water Per Lbs Grain: 1.28
Grain Temp: 72 F
Dough In Temp: 0 Time: 0
Saccharification Rest Temp: 153 Time: 60
Mash-out Rest Temp: 168 Time: 5
Sparge Temp: 170 Time: 10
Runnings Stopped At: 1.010 SG 2.56 Plato
Total Mash Volume Gal: 5.00 - After Additional Infusions
All temperature measurements are degrees Fahrenheit.
Water Needed For Brewing Session
--------------------------------
Sparge Amount: 5.00 Sparge Deadspace: 0.25 Total Into Mash: 4.75
Total Grain Lbs: 12.50 Qts Per Lbs: 1.28 Total From Mash: 2.50
Mash Gallons: 4.00
Grain Absorption: 1.50
Amount Lost in Lauter Tun Deadspace,
Grant and Misc. to Kettle: 0.50
Top Up Water Added to Kettle: 1.00
Amount into Kettle: 7.75
Boil Time (min): 70.00 Evaporation Rate: 18.00
Amount after Boil: 6.12
Left in Kettle Deadspace: 0.50
Left in Hopback: 0.00
Left in Counterflow Chiller: 0.25
Left in Other Equipment / Other Absorption: 0.00
Amount to Chillers: 5.37
Amount After Cooling (4 perc.): 5.16
Grain absorption rate is: 0.12 (Gallons Per Lbs)
Evaporation rate is Percent per Hour
This formulation will yield 5.16 gallons of fermentable wort.
You will need 10.00 gallons of water for the complete brewing session.
Fermentation Specifics
----------------------
Pitched From: Starter
Amount Pitched: 0 mL
Lag Time: 5.00 hours
Primary Fermenter: Glass
Primary Type: Closed
Days In Primary: 7
Primary Temperature: 68 degrees F
Carbonated to 2.4 volumes of CO2
