• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Georgia Beverage-Air (BM-23) Kegerator

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

Butchhe

Well-Known Member
Joined
Mar 27, 2010
Messages
119
Reaction score
6
Location
Warner Robins, Georgia
This is a split from a previous for sale thread that can be seen here.

https://www.homebrewtalk.com/showthread.php?t=587372

I have a Beverage-Air (BM-23) kegerator for sale. It has been running for three years since I have reconditioned it without any issues.

Asking $550

Comes with the following:
SS 3” tower
3 x Perlick 525SS faucets (no leaks) with tap handles
2 x Ball lock kegs
1 x Sixth Sankey keg
5# CO2 bottle (just filled and used on current keg)
4 way SS CO2 distributer
Taprite Dual gauge regulator
STC-1000 Temp controller
10’ beer line per keg
DIY line cleaning kit with aquarium pump
Standard Sankey coupler
Low profile Sankey coupler
3' tower cooler hose
3 - 5' beer line with sankey connectors (hex nuts and hose nipples)
Growler filler tube
Glass mat
Glassware
DIY Chalkboard

I had a used replacement compressor installed by one of the local air conditioning businesses who went through the whole system, replaced the dryer and put in fresh R-12 refrigerant. I replaced the door seal, lock and keys, patched the holes in the exterior and gave it a fresh coat of Rustoleum hammered charcoal black paint. On the inside, I replaced the tower cooler hose, drain hose and waste bottle, painted the top portion white to make it easier to see and the lower half has automotive undercoating spray to handle the kegs being drug across it. On the top, I replaced the drip tray, drain hose connector, added a temp controller, removed the single tap and tower and added a sexy 3” triple tap stainless steel tower topped with 3 Perlick 525SS faucets, new beer and CO2 lines and SS elbow shanks.

Thanks for looking.

IMAG0115.jpg


IMAG0116.jpg


IMAG0117.jpg


IMAG0260.jpg
 
Status
Not open for further replies.
Back
Top