Adding gelatin finings - the no BS way

[TimelessCynic]

Stupid autocorrect. Sorry can't edit the subject.

Can someone please provide me with simple step by step instructions on how to add gelatin finings to my beer. I've never done it before. I have a small container of LD Carlson gelatin. Label says add 1/2 teaspoon per 5 gal. Soak in cold water for an hour add boiling water to dissolve. I've seen a lot of conflicting instructions online. I have a keg of uncarbonated kolsch beer at 30 F i want to add it to.

Thank You


Sent from my iPhone using Home Brew

 

[Veedo]

You aren't kidding about the conflicting info. I use biofine just for that reason. I'd like to hear the responses, sorry for being of no help.

 

[opiate82]

I've used the bertusbrewery.com method for some time now. It is quick, easy and has given me great results.

http://www.bertusbrewery.com/2012/06/how-to-clear-your-beer-with-gelatin.html

 

[TimelessCynic]

That's great info. Thanks opiate.


Sent from my iPhone using Home Brew

 

[orangemen5]

Also use brutus brewery method. Works great.

 

[orangemen5]

Edit: bertus

 

[TimelessCynic]

Just added it 2 minutes ago. Took no time at all. I'm looking forward to the results.


Sent from my iPhone using Home Brew

 

[sfrisby]

Knox directions
Cold-crash beer in carboy for 2 or 3 days first
Sprinkle 1/2 tbsp gelatin into Pyrex measuring cup containing 1 cup water.
Wait 20-30 minutes.
Microwave for 45 seconds.
Check temperature with sanitized candy thermometer
Microwave in 10-15 second increments until temperature approaches 150° F
Stir with sanitized spoon to ensure gelatin is completely dissolved
Pour solution into carboy of cold beer
Wait 3-4 more days
Rack to corney keg, leaving sediment behind, begin carbing.

 

[butterpants]

Knox directions
Cold-crash beer in carboy for 2 or 3 days first
Sprinkle 1/2 tbsp gelatin into Pyrex measuring cup containing 1 cup water.
Wait 20-30 minutes.
Microwave for 45 seconds.
Check temperature with sanitized candy thermometer
Microwave in 10-15 second increments until temperature approaches 150° F
Stir with sanitized spoon to ensure gelatin is completely dissolved
Pour solution into carboy of cold beer
Wait 3-4 more days
Rack to corney keg, leaving sediment behind, begin carbing.

I do this. Works well

Sent from my Galaxy Nexus using Home Brew mobile app

 

[TimelessCynic]

I just realized i forgot to shake my keg around after adding the gelatin/water mixture. Does it matter?


Sent from my iPhone using Home Brew

 

[sfrisby]

I just realized i forgot to shake my keg around after adding the gelatin/water mixture. Does it matter?


Sent from my iPhone using Home Brew

Not for me.

 

[kombat]

Knox directions
Cold-crash beer in carboy for 2 or 3 days first
Sprinkle 1/2 tbsp gelatin into Pyrex measuring cup containing 1 cup water.
Wait 20-30 minutes.
Microwave for 45 seconds.
Check temperature with sanitized candy thermometer
Microwave in 10-15 second increments until temperature approaches 150° F
Stir with sanitized spoon to ensure gelatin is completely dissolved
Pour solution into carboy of cold beer
Wait 3-4 more days
Rack to corney keg, leaving sediment behind, begin carbing.

This is EXACTLY what I do (even with the candy thermometer!), and I've had great results.

Sent from the future using a Delorean

 

[RmikeVT]

I just realized i forgot to shake my keg around after adding the gelatin/water mixture. Does it matter?


Sent from my iPhone using Home Brew

No, not in my experience.

 

[notixx]

Thanks for that info opiate. very straight forward.

 

[opiate82]

Thanks for that info opiate. very straight forward.

Don't thank me, thank Scottland, he runs that blog and is a poster here.

 

[ArcLight]

Does the gelatin layer sink all the way to the bottom so its flat on the trub?
Or is there a 1-2 inch thick layer of "stuff" that you also leave behind = lost beer?

 

[opiate82]

I've always done it in my kegs, so I don't know how it settles in the fermenter, but as far as lost beer, probably about two pints of "sludge" comes out, then crystal clear beer from there.

 

[sfrisby]

Does the gelatin layer sink all the way to the bottom so its flat on the trub?
Or is there a 1-2 inch thick layer of "stuff" that you also leave behind = lost beer?

There really wouldn't be any lost beer. If any sludge sinks to the bottom, then the level of beer rises to displace the volume of gelatin added.

 

[orangemen5]

Whats the purpose of letting it bloom for 20 min. I've usually just mixed mine with water and started heating right away. Never tried it the other way so I'm just wondering.

 

[Spartan1979]

The method I use (stolen from the Garage Brewers Society forum):

Boil a cup of water in a pyrex measuring cup in the microwave, 3-4 minutes. While it is cooking, wash and sanitize a fork and thermometer probe. As soon as the microwave beeps, open the door and drop the fork and probe in the hot water. Be careful, because the water will bubble and spit when adding them. Quickly close the microwave door and wait until the temps drop below 180 or so, only a couple of minutes. Then add a packet of Knox Gelatin and mix it up. After mixed, Add 1/2 cup per keg. If the beer is still in the carboy, rack into the keg on top of the gelatin. Put on CO2, pour off the sludge and drink clear beer. I don't bother letting the gelatin mixture cool to room temp. The mixture will instantly cool off to your beer temperature.

If you aren't going to move the kegs, there is no need to transfer to a new keg. The sediment will form a nice cake at the bottom and stay there until the keg blows. But if you are preparing a keg to serve at a festival where the keg will be moved and shaken, I would definitely transfer to a clean keg.

 

[TimelessCynic]

Whats the purpose of letting it bloom for 20 min. I've usually just mixed mine with water and started heating right away. Never tried it the other way so I'm just wondering.

Seems like an additional step that just adds time and complexity. Maybe its something that adds an imperceptibly small improvement. Anyhow, I'm gonna check my results in a couple weeks and see. If my beer is clear then i know i won't need to add time with the 'bloom' process.


Sent from my iPhone using Home Brew

 

[TimelessCynic]

What about adding gelatin finings to beer that is already carbonated? Any adverse reactions? thanks.


Sent from my iPhone using Home Brew

 

[kombat]

Seems like an additional step that just adds time and complexity. Maybe its something that adds an imperceptibly small improvement.

It allows each granule of gelatin to properly rehydrate and swell, ensuring it dissolves more completely during the next step (heating).

 

[opiate82]

What about adding gelatin finings to beer that is already carbonated? Any adverse reactions? thanks.

Some quick Google-Fu tells me that adding gelatin to carbonated beer should work fine, you might lose a touch of carbonation but just keep it on the gas and you will be fine.

Reference: https://www.homebrewtalk.com/f14/adding-gelatin-kegged-carbed-beer-288651/#post3591163

 

[TimelessCynic]

Thanks. I figured the same. That second post was so sarcastic. Some people here think their **** don't stank. I plan on naturally carbonating with spunding valve and then adding the gelatin. Glad i won't run into problems.


Sent from my iPhone using Home Brew

 

[HopSong]

What sarcastic. He agreed with the OP and offered another suggestion.

 

[TimelessCynic]

From the above link. The second post in that thread. About making beer jello.


Sent from my iPhone using Home Brew

 

[Safa]

Here's a cream ale I just finished, I ran out of Irish moss so used the gelatin method described above (cold crash beer, throw in keg, bloom gelatin, microwave to 150). It's been settling in the keg for about a week now and it's still not bright.

I chilled to pitching in around 6m when I brewed this, so that's not the problem.

Maybe Irish moss (or whirl floc) is just absolutely necessary, even if you're planning on using gelatin.


Sent from my iPhone using Home Brew

 

[TimelessCynic]

I'm very happy with my results. First time using gelatin. I did not let it 'bloom'. I did not shake my keg after adding.


Sent from my iPhone using Home Brew

 

[TimelessCynic]

So do you guys think that adding gelatin after a dry hop will result in substantially less hop aroma. Maybe the gelatin will bond with the hop oils and cause them to precipitate out?


Sent from my iPhone using Home Brew