Roundhouse
Well-Known Member
- Joined
- Jul 28, 2014
- Messages
- 135
- Reaction score
- 17
I wouldn't be surprised if that warps under pressure when recirculating and just pops right up out of there. Watch out for that. Hopefully it doesn't happen.
I wouldn't be surprised if that warps under pressure when recirculating and just pops right up out of there. Watch out for that. Hopefully it doesn't happen.
Could you share some photos of your latest 2 vessel RIMS system ?Well my attempt to emulate a BIAB brew system turned into a 2 vessel RIMS system.
That being said- I'm hitting about 82% efficiency and I'm able to hold temps spot on for the mash cycle. Today things are getting a lot smoother and I may be able to finish two batches in less than 8 hours (ugh- a few 4:30am nights lately).
I'm putting 40 gallons in the fermenter per batch now for a total of 80 gallons. That gives me just about 5 kegs filled.
I'm using a "isobaric carbonation" method which is working out incredible in about 3 hours for the 80 gallons and hitting the carb levels spot on. It's not too easy for a home brewer at 5 gallons but works well at my level.
we have a Facebook page at:
Bandit Brewing Co.
if anyone wants to follow along. There are picts of the chiller setup and the brew system. Let me know and I can post more photos of any of the equipment you are interested in seeing.
We opened BLACK FRIDAY and had a nice crowd that night and I felt good about the weekend traffic considering we did virtually NO marketing except putting up a few flyers in our town of 733 people.
This week we start marketing as the ski traffic will pick up thru town. There's so many hats to wear.
JC
Could you share some photos of your latest 2 vessel RIMS system ?
I'm building Kettle rims system
pls check your facebook page is not available anymore
Enter your email address to join: