???? Is this a -"Ban the use of copper" post?...
Do it once and do it with SS and be done with it with no worries.
If so, most of the world is in serious trouble.
Just saying...
???? Is this a -"Ban the use of copper" post?...
Do it once and do it with SS and be done with it with no worries.
???? Is this a -"Ban the use of copper" post?
If so, most of the world is in serious trouble.
Just saying...
???? Is this a -"Ban the use of copper" post?
If so, most of the world is in serious trouble.
Just saying...
try using an adjustable wrench opened to the exact OD of the tubing (set it on unkinked tubing) and you can work it around small kinks and "re- round" the tubing. It takes a little practice to work them out- and real bad kinks are probably goners, but you can fix the little ones...
BTW way John no f'ing fair wearing sandals in February! Grrrrrrr it's like 20 degrees here and with the 30mph winds it feels below zero!
Wow, that looks amazing! Nice job bending that in such a consistent manner. How much time do you have invested in this?
Got home from work, 40 minutes to set up (finding tools), 20-30 minutes to coil, then 10 minutes to clean up.
Fair to say 1 to 1.5 hours.
2 coils and 140 in the hole, Texan please save me from my inability to bend SS. PM me if you aren't to swamped w requests to talk specifics. Your work looks slick
Texan said:FYI,
Dover97 lives close to the house and he came over to have his coil made. After we finished his coil we put it in his Keggle that he had brought with him.
He had an electric set up with the heating element already installed. This raised his coupling penetration height on his keggle where the coil would attach.
This gave him a 12" height from coil inlet to coil outlet. The 50' coil could be compressed with wires or zip ties to just fit into this dimension but it was a pretty tight fit. We figured that a 25' coil in this application might work better.
He is going to use a tubing cutter to cut his coil down to achieve more of a custom fit to his keggle.
Tell Dover97 I'll buy the remaining 25 ft. I have the same electric keggle hlt
Texan said:Not sure how much he is going to use, we just thought 25' would have fit better.
Forcabrew, what is the distance between your inlet and outlet?
Enter your email address to join: