jordo_99
Well-Known Member
- Joined
- Feb 4, 2018
- Messages
- 56
- Reaction score
- 23
Edit: I'm going to buy one (B008JVM0BE off Amazon).
I managed to find some gauges locally for $5 that will fit perfectly (1/8", 0-30psi) so I'm going to give it a shot and report back.
-------------------------------------------
Explanation:
My keezer is REALLY tight with 3 kegs so I'm not even certain that I have the room for another regulator...so it's not so much about saving money as conserving space.
I currently have a 4-way manifold, single body regulator and Keezer set up for 3 kegs...I want to try to have variable pressure at each of the manifold ports using a single regulator to control pressure going into it and then reduce it further at each port. Probably something like this:
manifold port 1 -- regulator at 16psi -- wheat/hefe keg
manifold port 2 -- regulator at 11psi -- ales/lager keg
manifold port 3 -- regulator at 6psi -- stout/porter keg
manifold port 4 -- (no regulator) 35psi -- force-carbing
Essentially, I would be installing in-line regulators between the manifold and each of my kegs.
----------------------
Has anybody seen success in doing this?
I managed to find some gauges locally for $5 that will fit perfectly (1/8", 0-30psi) so I'm going to give it a shot and report back.
-------------------------------------------
Explanation:
My keezer is REALLY tight with 3 kegs so I'm not even certain that I have the room for another regulator...so it's not so much about saving money as conserving space.
I currently have a 4-way manifold, single body regulator and Keezer set up for 3 kegs...I want to try to have variable pressure at each of the manifold ports using a single regulator to control pressure going into it and then reduce it further at each port. Probably something like this:
manifold port 1 -- regulator at 16psi -- wheat/hefe keg
manifold port 2 -- regulator at 11psi -- ales/lager keg
manifold port 3 -- regulator at 6psi -- stout/porter keg
manifold port 4 -- (no regulator) 35psi -- force-carbing
Essentially, I would be installing in-line regulators between the manifold and each of my kegs.
----------------------
Has anybody seen success in doing this?
Last edited: