obeahsf
Well-Known Member
Location - Berkeley, CA
I have the following available. Local pickup preferred, in particular for the stand.
Fermenters and brite tank do not include fittings, except the TC thermowells with NPT adapters.
$700 - 40 gallon Stout Conical Fermenter - fermenters are rated to 4 PSI and are designed to fit in a stand up freezer for temperature control. 3" TC port on side for CIP spray ball (spray ball not included). 1.5" TC blow off port Will include fittings for
$575 40 gallon Stout Conical Fermenter - same as the first, but missing the lid gasket (can be purchased from stout), and lid has been buckled from being over-pressurized. Should be easy to hammer out. Looks like it will still seal with the damaged lid, but no guarantee. Check with Stout for replacement.
$850 40 gallon Stout Brite Tank - Non jacketed. Rated to 15 PSI
$600 - Big welded brew stand that could hold a Datsun. Fitted with manifold and propane regulator, 3 burners, with individual ball valves, etc. It's rusty and could use a scrub, but it blasts.
My only complaint on the fermenters is the lid gasket. They are not easy to adhere to the lid. Star-San makes them a bit slick. Stout recommended Iodophor. We've used double-sided tape with plenty of Sani with no contamination issue.
Whole Lot - $2475
I have the following available. Local pickup preferred, in particular for the stand.
Fermenters and brite tank do not include fittings, except the TC thermowells with NPT adapters.
$700 - 40 gallon Stout Conical Fermenter - fermenters are rated to 4 PSI and are designed to fit in a stand up freezer for temperature control. 3" TC port on side for CIP spray ball (spray ball not included). 1.5" TC blow off port Will include fittings for
$575 40 gallon Stout Conical Fermenter - same as the first, but missing the lid gasket (can be purchased from stout), and lid has been buckled from being over-pressurized. Should be easy to hammer out. Looks like it will still seal with the damaged lid, but no guarantee. Check with Stout for replacement.
$850 40 gallon Stout Brite Tank - Non jacketed. Rated to 15 PSI
$600 - Big welded brew stand that could hold a Datsun. Fitted with manifold and propane regulator, 3 burners, with individual ball valves, etc. It's rusty and could use a scrub, but it blasts.
My only complaint on the fermenters is the lid gasket. They are not easy to adhere to the lid. Star-San makes them a bit slick. Stout recommended Iodophor. We've used double-sided tape with plenty of Sani with no contamination issue.
Whole Lot - $2475
Last edited: