luckylindy345
Well-Known Member
- Joined
- Oct 9, 2008
- Messages
- 82
- Reaction score
- 0
Alright, I made a rookie wordworking mistake yesterday...I forgot that 2x6's aren't really 2x6. I measured everything several times and all my numbers came out to be perfect, except for that one oversight. Anyway, I was thinking about lining the collar up with the back of the freezer so that the hinges can be fixed properly and just going from there instead of going back to Home Depot and doing it all over again. If I did this, the collar would extend an inch shorter than it should at the front of the freezer.
So my question: will this be a problem as far as dispensing beer from the taps? I figured the taps would extend far enough so that I would still have enough space to dispense, but I wasn't sure as I have never seen a keezer (other than pictures). I don't really care if it doesn't look perfect, as long as it serves its intended purpose.
Thanks!
So my question: will this be a problem as far as dispensing beer from the taps? I figured the taps would extend far enough so that I would still have enough space to dispense, but I wasn't sure as I have never seen a keezer (other than pictures). I don't really care if it doesn't look perfect, as long as it serves its intended purpose.
Thanks!