DavidSwede
Active Member
- Joined
- Feb 11, 2016
- Messages
- 29
- Reaction score
- 3
Hi! Wondering if someone with wiring experience can help me.... I bought equipment to make a stir plate from another website before realising their instructions were way too vague. I have,
1 fan, red + black wires
1 potentiometer, 3 connetions
1 on/off switch, 2 connections
1 female adapter for power supply, 3 connections
1 led for aesthetics, red + yellow wires
I was able to get the fan going just using the dc adapter and the on/off witch but the fan was too fast, I need to get that potentiometer hooked in but cant figure out the configuration. Any help much appreciated
David.
1 fan, red + black wires
1 potentiometer, 3 connetions
1 on/off switch, 2 connections
1 female adapter for power supply, 3 connections
1 led for aesthetics, red + yellow wires
I was able to get the fan going just using the dc adapter and the on/off witch but the fan was too fast, I need to get that potentiometer hooked in but cant figure out the configuration. Any help much appreciated
David.